Easier access to scientific data
|
ERDDAP
Easier access to scientific data |
| griddap | Subset | tabledap | Make A Graph | wms | files | Title | Summary | FGDC | ISO 19115 | Info | Background Info | RSS | Institution | Dataset ID | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| https://erddap.emso-fr.org/erddap/tabledap/EMSO_Marmara_RCM_Maregami2.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO_Marmara_RCM_Maregami2 | https://erddap.emso-fr.org/erddap/tabledap/EMSO_Marmara_RCM_Maregami2.graph | EMSO / MAREGAMI Marmara BPR2 station Lat:40.7934 Long:29.0312 Depth:1225m, Seaguard RCM data | Seaguard RCM: Time series acquired with Seaguard RCM #155, sensors: DCS #146, Conductivity #788, Tide (P,T) #393\n\ncdm_data_type = Point\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nnorthward_seawater_velocity (m.s-1)\neastward_seawater_velocity (m.s-1)\nInstrument_heading_Deg (degree)\nTilt_X_Deg (degree)\nTilt_Y_Deg (degree)\nSingle_ping_Std_cm_s_1 (cm.s-1)\nSignal_Strength_dB (dB)\nsea_water_electrical_conductivity (S.m-1)\nsea_water_temperature (degree_C)\nsea_water_pressure (dbar)\nlatitude (degrees_north)\nlongitude (degrees_east)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO_Marmara_RCM_Maregami2_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO_Marmara_RCM_Maregami2_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO_Marmara_RCM_Maregami2/index.htmlTable | http://www.emso-fr.org/EMSO-France
| https://erddap.emso-fr.org/erddap/rss/EMSO_Marmara_RCM_Maregami2.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO_Marmara_RCM_Maregami2&showErrors=false&email= | CEREGE UMR 7330 CNRS | EMSO_Marmara_RCM_Maregami2 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO_Marmara_RCM_Maregami3.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO_Marmara_RCM_Maregami3 | https://erddap.emso-fr.org/erddap/tabledap/EMSO_Marmara_RCM_Maregami3.graph | EMSO / MAREGAMI Marmara BPR3 station Lat:40.8568, Long:28.1523, Depth:1184m Seaguard RCM data | Seaguard RCM: Time series acquired with Seaguard RCM #155, sensors: DCS #146, Conductivity #788, Tide (P,T) #393\n\ncdm_data_type = Point\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nnorthward_seawater_velocity (m.s-1)\neastward_seawater_velocity (m.s-1)\nInstrument_heading_Deg (degree)\nTilt_X_Deg (degree)\nTilt_Y_Deg (degree)\nStd_Tilt_Deg (degree)\nSingle_ping_Std_cm_s_1 (cm.s-1)\nSignal_Strength_dB (Signal Strength D B, dB)\nsea_water_temperature (degree_C)\nsea_water_pressure (dbar)\nmole_concentration_of_dissolved_molecular_oxygen_in_sea_water (mol.m-3)\nlatitude (degrees_north)\nlongitude (degrees_east)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO_Marmara_RCM_Maregami3_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO_Marmara_RCM_Maregami3_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO_Marmara_RCM_Maregami3/index.htmlTable | http://www.emso-fr.org/EMSO-France
| https://erddap.emso-fr.org/erddap/rss/EMSO_Marmara_RCM_Maregami3.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO_Marmara_RCM_Maregami3&showErrors=false&email= | CEREGE UMR 7330 CNRS | EMSO_Marmara_RCM_Maregami3 | |||
| https://erddap.emso-fr.org/erddap/tabledap/GL_TS_MO_EMSO-Azores-SeamonWest_history.subset | https://erddap.emso-fr.org/erddap/tabledap/GL_TS_MO_EMSO-Azores-SeamonWest_history | https://erddap.emso-fr.org/erddap/tabledap/GL_TS_MO_EMSO-Azores-SeamonWest_history.graph | EMSO Azores Seamon-West near real time data (history) | Global Ocean - In Situ Observation Copernicus\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\nTIME_QC (Time quality flag)\nDC_REFERENCE (Station/Location unique identifier in data centre)\ndepth (m)\nDEPH_QC (Depth quality flag)\nPRES (Sea pressure, dbar)\nPRES_QC (Sea pressure quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nTEMP_DOXY (Sea temperature from oxygen sensor, degree_Celsius)\nTEMP_DOXY_QC (Sea temperature from oxygen sensor quality flag)\nPSAL (Practical salinity, 0.001)\nPSAL_QC (Practical salinity quality flag)\nCNDC (Electrical conductivity, S m-1)\nCNDC_QC (Electrical conductivity quality flag)\nDOXY (Dissolved oxygen, MMol' 'M-3)\nDOXY_QC (Dissolved oxygen quality flag)\nOSAT (Oxygen saturation, percent)\nOSAT_QC (Oxygen saturation quality flag)\nSVEL (Sound velocity, m s-1)\nSVEL_QC (Sound velocity quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/GL_TS_MO_EMSO-Azores-SeamonWest_history_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/GL_TS_MO_EMSO-Azores-SeamonWest_history_iso19115.xml | https://erddap.emso-fr.org/erddap/info/GL_TS_MO_EMSO-Azores-SeamonWest_history/index.htmlTable | http://marine.copernicus.eu
| https://erddap.emso-fr.org/erddap/rss/GL_TS_MO_EMSO-Azores-SeamonWest_history.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=GL_TS_MO_EMSO-Azores-SeamonWest_history&showErrors=false&email= | IFREMER Institut Français de Recherche pour l'Exploitation de la Mer | GL_TS_MO_EMSO-Azores-SeamonWest_history | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2016-2017.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2016-2017 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2016-2017.graph | EMSO Azores TCM3-1 Ocean Bottom Tilt Current Meter : 2016-2017 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-1_2016-2017_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-1_2016-2017_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-1_2016-2017/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-1_2016-2017.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-1_2016-2017&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-1_2016-2017 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2017-2018.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2017-2018 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2017-2018.graph | EMSO Azores TCM3-1 Ocean Bottom Tilt Current Meter : 2017-2018 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-1_2017-2018_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-1_2017-2018_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-1_2017-2018/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-1_2017-2018.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-1_2017-2018&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-1_2017-2018 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2018-2019.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2018-2019 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2018-2019.graph | EMSO Azores TCM3-1 Ocean Bottom Tilt Current Meter : 2018-2019 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-1_2018-2019_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-1_2018-2019_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-1_2018-2019/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-1_2018-2019.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-1_2018-2019&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-1_2018-2019 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2021-2022.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2021-2022 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2021-2022.graph | EMSO Azores TCM3-1 Ocean Bottom Tilt Current Meter : 2021-2022 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-1_2021-2022_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-1_2021-2022_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-1_2021-2022/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-1_2021-2022.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-1_2021-2022&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-1_2021-2022 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2017-2018.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2017-2018 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2017-2018.graph | EMSO Azores TCM3-2 Ocean Bottom Tilt Current Meter : 2017-2018 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-2_2017-2018_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-2_2017-2018_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-2_2017-2018/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-2_2017-2018.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-2_2017-2018&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-2_2017-2018 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2018-2019.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2018-2019 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2018-2019.graph | EMSO Azores TCM3-2 Ocean Bottom Tilt Current Meter : 2018-2019 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-2_2018-2019_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-2_2018-2019_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-2_2018-2019/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-2_2018-2019.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-2_2018-2019&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-2_2018-2019 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2019-2020.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2019-2020 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2019-2020.graph | EMSO Azores TCM3-2 Ocean Bottom Tilt Current Meter : 2019-2020 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-2_2019-2020_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-2_2019-2020_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-2_2019-2020/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-2_2019-2020.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-2_2019-2020&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-2_2019-2020 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2020-2021.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2020-2021 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2020-2021.graph | EMSO Azores TCM3-2 Ocean Bottom Tilt Current Meter : 2020-2021 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-2_2020-2021_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-2_2020-2021_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-2_2020-2021/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-2_2020-2021.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-2_2020-2021&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-2_2020-2021 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2016-2017.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2016-2017 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2016-2017.graph | EMSO Azores TCM3-3 Ocean Bottom Tilt Current Meter : 2016-2017 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-3_2016-2017_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-3_2016-2017_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-3_2016-2017/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-3_2016-2017.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-3_2016-2017&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-3_2016-2017 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2017-2018.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2017-2018 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2017-2018.graph | EMSO Azores TCM3-3 Ocean Bottom Tilt Current Meter : 2017-2018 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-3_2017-2018_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-3_2017-2018_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-3_2017-2018/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-3_2017-2018.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-3_2017-2018&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-3_2017-2018 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2018-2019.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2018-2019 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2018-2019.graph | EMSO Azores TCM3-3 Ocean Bottom Tilt Current Meter : 2018-2019 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-3_2018-2019_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-3_2018-2019_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-3_2018-2019/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-3_2018-2019.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-3_2018-2019&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-3_2018-2019 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2019-2020.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2019-2020 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2019-2020.graph | EMSO Azores TCM3-3 Ocean Bottom Tilt Current Meter : 2019-2020 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-3_2019-2020_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-3_2019-2020_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-3_2019-2020/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-3_2019-2020.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-3_2019-2020&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-3_2019-2020 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2020-2021.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2020-2021 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2020-2021.graph | EMSO Azores TCM3-3 Ocean Bottom Tilt Current Meter : 2020-2021 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-3_2020-2021_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-3_2020-2021_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-3_2020-2021/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-3_2020-2021.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-3_2020-2021&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-3_2020-2021 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2021-2022.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2021-2022 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2021-2022.graph | EMSO Azores TCM3-3 Ocean Bottom Tilt Current Meter : 2021-2022 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-3_2021-2022_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-3_2021-2022_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-3_2021-2022/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-3_2021-2022.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-3_2021-2022&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-3_2021-2022 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-A_2020-2021.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-A_2020-2021 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-A_2020-2021.graph | EMSO Azores TCM3-A Ocean Bottom Tilt Current Meter : 2020-2021 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-A_2020-2021_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-A_2020-2021_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-A_2020-2021/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-A_2020-2021.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-A_2020-2021&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-A_2020-2021 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-B_2020-2021.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-B_2020-2021 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-B_2020-2021.graph | EMSO Azores TCM3-B Ocean Bottom Tilt Current Meter : 2020-2021 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-B_2020-2021_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-B_2020-2021_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-B_2020-2021/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-B_2020-2021.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-B_2020-2021&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-B_2020-2021 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-B_2021-2022.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-B_2021-2022 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-B_2021-2022.graph | EMSO Azores TCM3-B Ocean Bottom Tilt Current Meter : 2021-2022 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-B_2021-2022_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-B_2021-2022_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-B_2021-2022/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-B_2021-2022.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-B_2021-2022&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-B_2021-2022 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-C_2020-2021.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-C_2020-2021 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-C_2020-2021.graph | EMSO Azores TCM3-C Ocean Bottom Tilt Current Meter : 2020-2021 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-C_2020-2021_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-C_2020-2021_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-C_2020-2021/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-C_2020-2021.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-C_2020-2021&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-C_2020-2021 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-C_2021-2022.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-C_2021-2022 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-C_2021-2022.graph | EMSO Azores TCM3-C Ocean Bottom Tilt Current Meter : 2021-2022 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-C_2021-2022_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-C_2021-2022_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-C_2021-2022/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-C_2021-2022.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-C_2021-2022&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-C_2021-2022 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-D_2020-2021.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-D_2020-2021 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-D_2020-2021.graph | EMSO Azores TCM3-D Ocean Bottom Tilt Current Meter : 2020-2021 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-D_2020-2021_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-D_2020-2021_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-D_2020-2021/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-D_2020-2021.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-D_2020-2021&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-D_2020-2021 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-D_2021-2022.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-D_2021-2022 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-D_2021-2022.graph | EMSO Azores TCM3-D Ocean Bottom Tilt Current Meter : 2021-2022 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-D_2021-2022_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-D_2021-2022_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-D_2021-2022/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-D_2021-2022.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-D_2021-2022&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-D_2021-2022 | |||
| https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Dyfamed_TScurrents.subset | https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Dyfamed_TScurrents | https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Dyfamed_TScurrents.graph | EMSO Ligure Dyfamed mooring currentmeter data | Temperature, conductivity and pressure data collected from MOOSE moorings\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (Depth of each measurement, m)\nTEMP (Sea temperature, degree_Celsius)\nTEMP_QC (quality flag)\nPRES (Sea pressure, decibar)\nPRES_QC (quality flag)\nHCSP (Horizontal current speed, meter/second)\nHCSP_QC (quality flag)\nHCDT (Current to direction relative true north, degree)\nHCDT_QC (quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/Emso_Ligure_Dyfamed_TScurrents_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/Emso_Ligure_Dyfamed_TScurrents_iso19115.xml | https://erddap.emso-fr.org/erddap/info/Emso_Ligure_Dyfamed_TScurrents/index.htmlTable | http://www.insu.cnrs.fr/environnement/atmosphere/moose-mediterranean-ocean-observing-system-on-environment
| https://erddap.emso-fr.org/erddap/rss/Emso_Ligure_Dyfamed_TScurrents.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=Emso_Ligure_Dyfamed_TScurrents&showErrors=false&email= | Observatoire Océanologique de Villefranche-sur-Mer | Emso_Ligure_Dyfamed_TScurrents | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_EGIM_TEMP-CNDC-PRES_2017-2018.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_EGIM_TEMP-CNDC-PRES_2017-2018 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_EGIM_TEMP-CNDC-PRES_2017-2018.graph | EMSO-Azores, EGIM : Conductivity, temperature and pressure, 2017-2018 | This dataset contains conductivity, temperature and pressure data acquired between July 2017 and August 2018 on EMSO-Azores observatory by the EGIM. These are 3 of the 7 core parameters monitored by the EGIM, EMSO Generic Instrumental Module.\n\nThe EGIM prototype was deployed at Lucky Strike hydrothermal vent site, 25 m south west of the active edifice Tour Eiffel, to monitor local hydrodynamic variability and complement the data obtained by the numerous sensors set on this site: oceanographic mooring deployed south of the vent field, the multidisciplinary Seamon East node, autonomous current meters, array of temperature probes…\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nPRES (Sea pressure, dbar)\nPRES_QC (Sea pressure quality flag)\nCNDC (Electrical conductivity, S/m)\nCNDC_QC (Electrical conductivity quality flag)\nPSAL (Practical salinity, 0.001)\nPSAL_QC (Practical salinity quality flag)\nSVEL (Sound velocity, m/s)\nSVEL_QC (Sound velocity quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_EGIM_TEMP-CNDC-PRES_2017-2018_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_EGIM_TEMP-CNDC-PRES_2017-2018_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_EGIM_TEMP-CNDC-PRES_2017-2018/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_EGIM_TEMP-CNDC-PRES_2017-2018.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_EGIM_TEMP-CNDC-PRES_2017-2018&showErrors=false&email= | Ifremer IPGP | EMSO-AZORES_EGIM_TEMP-CNDC-PRES_2017-2018 |