Easier access to scientific data
|
ERDDAP
Easier access to scientific data |
| griddap | Subset | tabledap | Make A Graph | wms | files | Title | Summary | FGDC | ISO 19115 | Info | Background Info | RSS | Institution | Dataset ID | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| https://erddap.emso-fr.org/erddap/tabledap/Emso_Azores_Chemini_IRON.subset | https://erddap.emso-fr.org/erddap/tabledap/Emso_Azores_Chemini_IRON | https://erddap.emso-fr.org/erddap/tabledap/Emso_Azores_Chemini_IRON.graph | EMSO Azores Seamon-East Chemini dissolved iron concentration | This dataset contains dissolved iron concentrations ((Fe(II) + Fe(III); µmol/l) acquired between September 2013 and July 2017 using the CHEMINI Fe, a CHEmical MINIaturized analyser (samples taken every 12 hours, with daily in situ calibration using a 20 µmol/l iron standard, Vuillemin et al., 2009). The sample inlet was positioned on the mussel bed at the base of the Tour Eiffel edifice of the Lucky Strike hydrothermal vent (1695 depth).CHEMINI Fe (CF2) was mounted on the TEMPO module which was itself connected to the SeaMON East node of the EMSO-Azores observatory. Measured properties: temperature and Total dissolved iron concentration\n\ncdm_data_type = TimeSeries\nVARIABLES:\nplatform_code\nplatform_name\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_Celsius)\nTEMP_QC (Sea temperature quality flag)\nIRON (Total iron, millimole/m3)\nIRON_QC (Total iron quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/Emso_Azores_Chemini_IRON_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/Emso_Azores_Chemini_IRON_iso19115.xml | https://erddap.emso-fr.org/erddap/info/Emso_Azores_Chemini_IRON/index.htmlTable | http://www.oceansites.org
| https://erddap.emso-fr.org/erddap/rss/Emso_Azores_Chemini_IRON.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=Emso_Azores_Chemini_IRON&showErrors=false&email= | Ifremer Institut Francais de Recherche pour l'Exploitation de la Mer | Emso_Azores_Chemini_IRON | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2016-2017.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2016-2017 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2016-2017.graph | EMSO Azores TCM3-1 Ocean Bottom Tilt Current Meter : 2016-2017 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-1_2016-2017_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-1_2016-2017_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-1_2016-2017/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-1_2016-2017.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-1_2016-2017&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-1_2016-2017 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2017-2018.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2017-2018 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2017-2018.graph | EMSO Azores TCM3-1 Ocean Bottom Tilt Current Meter : 2017-2018 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-1_2017-2018_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-1_2017-2018_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-1_2017-2018/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-1_2017-2018.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-1_2017-2018&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-1_2017-2018 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2018-2019.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2018-2019 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2018-2019.graph | EMSO Azores TCM3-1 Ocean Bottom Tilt Current Meter : 2018-2019 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-1_2018-2019_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-1_2018-2019_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-1_2018-2019/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-1_2018-2019.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-1_2018-2019&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-1_2018-2019 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2021-2022.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2021-2022 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2021-2022.graph | EMSO Azores TCM3-1 Ocean Bottom Tilt Current Meter : 2021-2022 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-1_2021-2022_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-1_2021-2022_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-1_2021-2022/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-1_2021-2022.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-1_2021-2022&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-1_2021-2022 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2017-2018.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2017-2018 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2017-2018.graph | EMSO Azores TCM3-2 Ocean Bottom Tilt Current Meter : 2017-2018 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-2_2017-2018_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-2_2017-2018_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-2_2017-2018/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-2_2017-2018.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-2_2017-2018&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-2_2017-2018 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2018-2019.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2018-2019 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2018-2019.graph | EMSO Azores TCM3-2 Ocean Bottom Tilt Current Meter : 2018-2019 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-2_2018-2019_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-2_2018-2019_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-2_2018-2019/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-2_2018-2019.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-2_2018-2019&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-2_2018-2019 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2019-2020.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2019-2020 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2019-2020.graph | EMSO Azores TCM3-2 Ocean Bottom Tilt Current Meter : 2019-2020 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-2_2019-2020_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-2_2019-2020_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-2_2019-2020/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-2_2019-2020.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-2_2019-2020&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-2_2019-2020 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2020-2021.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2020-2021 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2020-2021.graph | EMSO Azores TCM3-2 Ocean Bottom Tilt Current Meter : 2020-2021 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-2_2020-2021_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-2_2020-2021_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-2_2020-2021/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-2_2020-2021.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-2_2020-2021&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-2_2020-2021 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2016-2017.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2016-2017 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2016-2017.graph | EMSO Azores TCM3-3 Ocean Bottom Tilt Current Meter : 2016-2017 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-3_2016-2017_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-3_2016-2017_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-3_2016-2017/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-3_2016-2017.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-3_2016-2017&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-3_2016-2017 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2017-2018.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2017-2018 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2017-2018.graph | EMSO Azores TCM3-3 Ocean Bottom Tilt Current Meter : 2017-2018 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-3_2017-2018_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-3_2017-2018_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-3_2017-2018/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-3_2017-2018.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-3_2017-2018&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-3_2017-2018 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2018-2019.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2018-2019 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2018-2019.graph | EMSO Azores TCM3-3 Ocean Bottom Tilt Current Meter : 2018-2019 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-3_2018-2019_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-3_2018-2019_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-3_2018-2019/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-3_2018-2019.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-3_2018-2019&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-3_2018-2019 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2019-2020.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2019-2020 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2019-2020.graph | EMSO Azores TCM3-3 Ocean Bottom Tilt Current Meter : 2019-2020 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-3_2019-2020_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-3_2019-2020_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-3_2019-2020/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-3_2019-2020.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-3_2019-2020&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-3_2019-2020 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2020-2021.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2020-2021 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2020-2021.graph | EMSO Azores TCM3-3 Ocean Bottom Tilt Current Meter : 2020-2021 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-3_2020-2021_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-3_2020-2021_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-3_2020-2021/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-3_2020-2021.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-3_2020-2021&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-3_2020-2021 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2021-2022.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2021-2022 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2021-2022.graph | EMSO Azores TCM3-3 Ocean Bottom Tilt Current Meter : 2021-2022 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-3_2021-2022_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-3_2021-2022_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-3_2021-2022/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-3_2021-2022.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-3_2021-2022&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-3_2021-2022 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-A_2020-2021.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-A_2020-2021 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-A_2020-2021.graph | EMSO Azores TCM3-A Ocean Bottom Tilt Current Meter : 2020-2021 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-A_2020-2021_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-A_2020-2021_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-A_2020-2021/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-A_2020-2021.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-A_2020-2021&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-A_2020-2021 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-B_2020-2021.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-B_2020-2021 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-B_2020-2021.graph | EMSO Azores TCM3-B Ocean Bottom Tilt Current Meter : 2020-2021 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-B_2020-2021_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-B_2020-2021_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-B_2020-2021/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-B_2020-2021.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-B_2020-2021&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-B_2020-2021 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-B_2021-2022.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-B_2021-2022 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-B_2021-2022.graph | EMSO Azores TCM3-B Ocean Bottom Tilt Current Meter : 2021-2022 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-B_2021-2022_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-B_2021-2022_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-B_2021-2022/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-B_2021-2022.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-B_2021-2022&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-B_2021-2022 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-C_2020-2021.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-C_2020-2021 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-C_2020-2021.graph | EMSO Azores TCM3-C Ocean Bottom Tilt Current Meter : 2020-2021 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-C_2020-2021_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-C_2020-2021_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-C_2020-2021/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-C_2020-2021.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-C_2020-2021&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-C_2020-2021 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-C_2021-2022.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-C_2021-2022 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-C_2021-2022.graph | EMSO Azores TCM3-C Ocean Bottom Tilt Current Meter : 2021-2022 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-C_2021-2022_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-C_2021-2022_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-C_2021-2022/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-C_2021-2022.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-C_2021-2022&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-C_2021-2022 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-D_2020-2021.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-D_2020-2021 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-D_2020-2021.graph | EMSO Azores TCM3-D Ocean Bottom Tilt Current Meter : 2020-2021 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-D_2020-2021_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-D_2020-2021_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-D_2020-2021/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-D_2020-2021.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-D_2020-2021&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-D_2020-2021 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-D_2021-2022.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-D_2021-2022 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-D_2021-2022.graph | EMSO Azores TCM3-D Ocean Bottom Tilt Current Meter : 2021-2022 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-D_2021-2022_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-D_2021-2022_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-D_2021-2022/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-D_2021-2022.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-D_2021-2022&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-D_2021-2022 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2011-2012.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2011-2012 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2011-2012.graph | EMSO-Azores, SeaMoN East : CHEMINI total dissolved iron concentrations, 2011-2012 | This dataset contains dissolved iron concentrations (Fe(II) + Fe(III), µmol/l) acquired between July 2011 and March 2012 (n=1780) using the CHEMINI Fe, a CHEmical MINIaturized analyser (samples taken every 12 hours, without in situ calibration using a 25 µmol/l iron standard, Vuillemin et al., 2009). The sample inlet was positioned on the mussel bed at the base of the Tour Eiffel edifice of the Lucky Strike hydrothermal vent (1695 depth).\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nIRON (Total iron, umol/l)\nIRON_QC (Total iron quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_CHEMINI_Total-Iron_2011-2012_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_CHEMINI_Total-Iron_2011-2012_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_CHEMINI_Total-Iron_2011-2012/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_CHEMINI_Total-Iron_2011-2012.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_CHEMINI_Total-Iron_2011-2012&showErrors=false&email= | Ifremer IPGP | EMSO-AZORES_CHEMINI_Total-Iron_2011-2012 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2013-2014.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2013-2014 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2013-2014.graph | EMSO-Azores, SeaMoN East : CHEMINI total dissolved iron concentrations, 2013-2014 | This dataset contains dissolved iron concentrations (Fe(II) + Fe(III), µmol/l) acquired between September 2013 and February 2014 (n=332) using the CHEMINI Fe, a CHEmical MINIaturized analyser (samples taken every 24 hours, with daily in situ calibration using a 25 µmol/l iron standard, Vuillemin et al., 2009). The sample inlet was positioned on the mussel bed at the base of the Tour Eiffel edifice of the Lucky Strike hydrothermal vent (1695 depth).\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nIRON (Total iron, umol/l)\nIRON_QC (Total iron quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_CHEMINI_Total-Iron_2013-2014_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_CHEMINI_Total-Iron_2013-2014_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_CHEMINI_Total-Iron_2013-2014/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_CHEMINI_Total-Iron_2013-2014.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_CHEMINI_Total-Iron_2013-2014&showErrors=false&email= | Ifremer IPGP | EMSO-AZORES_CHEMINI_Total-Iron_2013-2014 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2014-2015.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2014-2015 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2014-2015.graph | EMSO-Azores, SeaMoN East : CHEMINI total dissolved iron concentrations, 2014-2015 | This dataset contains dissolved iron concentrations (Fe(II) + Fe(III), µmol/l) acquired between July 2014 and August 2014 (n=332) using the CHEMINI Fe, a CHEmical MINIaturized analyser (samples taken every 24 hours, with daily in situ calibration using a 25 µmol/l iron standard, Vuillemin et al., 2009). The sample inlet was positioned on the mussel bed at the base of the Tour Eiffel edifice of the Lucky Strike hydrothermal vent (1695 depth). CHEMINI Fe (CF1) was mounted on the TEMPO module which was itself connected to the SeaMON East node of the EMSO-Azores observatory.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nIRON (Total iron, umol/l)\nIRON_QC (Total iron quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_CHEMINI_Total-Iron_2014-2015_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_CHEMINI_Total-Iron_2014-2015_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_CHEMINI_Total-Iron_2014-2015/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_CHEMINI_Total-Iron_2014-2015.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_CHEMINI_Total-Iron_2014-2015&showErrors=false&email= | Ifremer IPGP | EMSO-AZORES_CHEMINI_Total-Iron_2014-2015 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2016-2017.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2016-2017 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2016-2017.graph | EMSO-Azores, SeaMoN East : CHEMINI total dissolved iron concentrations, 2016-2017 | This dataset contains dissolved iron concentrations (Fe(II) + Fe(III), µmol/l) acquired between September 2016 and February 2017 (n=332) using the CHEMINI Fe, a CHEmical MINIaturized analyser (samples taken every 24 hours, with daily in situ calibration using a 25 µmol/l iron standard, Vuillemin et al., 2009). The sample inlet was positioned on the mussel bed at the base of the Tour Eiffel edifice of the Lucky Strike hydrothermal vent (1695 depth). CHEMINI Fe (CF1) was mounted on the TEMPO module which was itself connected to the SeaMON East node of the EMSO-Azores observatory.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nIRON (Total iron, umol/l)\nIRON_QC (Total iron quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_CHEMINI_Total-Iron_2016-2017_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_CHEMINI_Total-Iron_2016-2017_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_CHEMINI_Total-Iron_2016-2017/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_CHEMINI_Total-Iron_2016-2017.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_CHEMINI_Total-Iron_2016-2017&showErrors=false&email= | Ifremer IPGP | EMSO-AZORES_CHEMINI_Total-Iron_2016-2017 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2017-2018.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2017-2018 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2017-2018.graph | EMSO-Azores, SeaMoN East : CHEMINI total dissolved iron concentrations, 2017-2018 | This dataset contains dissolved iron concentrations (Fe(II) + Fe(III), µmol/l) acquired between July 2017 and March 2018 (n=168) using the CHEMINI Fe, a CHEmical MINIaturized analyser (samples taken every 12 hours, with daily in situ calibration using a 20 µmol/l iron standard, Vuillemin et al., 2009). The sample inlet was positioned on the mussel bed at the base of the Tour Eiffel edifice of the Lucky Strike hydrothermal vent (1695 depth). CHEMINI Fe (CF2) was mounted on the TEMPO module which was itself connected to the SeaMON East node of the EMSO-Azores observatory.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nIRON (Total iron, umol/l)\nIRON_QC (Total iron quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_CHEMINI_Total-Iron_2017-2018_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_CHEMINI_Total-Iron_2017-2018_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_CHEMINI_Total-Iron_2017-2018/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_CHEMINI_Total-Iron_2017-2018.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_CHEMINI_Total-Iron_2017-2018&showErrors=false&email= | Ifremer IPGP | EMSO-AZORES_CHEMINI_Total-Iron_2017-2018 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2018-2019.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2018-2019 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2018-2019.graph | EMSO-Azores, SeaMoN East : CHEMINI total dissolved iron concentrations, 2018-2019 | This dataset contains dissolved iron concentrations (Fe(II) + Fe(III), µmol/l) acquired between August 2018 and December 2018 (n=445) using the CHEMINI Fe, a CHEmical MINIaturized analyser (samples taken every 12 hours, with daily in situ calibration using a 20 µmol/l iron standard, Vuillemin et al., 2009). The sample inlet was positioned on the mussel bed at the base of the Tour Eiffel edifice of the Lucky Strike hydrothermal vent (1695 depth). CHEMINI Fe (CF2) was mounted on the TEMPO module which was itself connected to the SeaMON East node of the EMSO-Azores observatory.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nIRON (Total iron, umol/l)\nIRON_QC (Total iron quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_CHEMINI_Total-Iron_2018-2019_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_CHEMINI_Total-Iron_2018-2019_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_CHEMINI_Total-Iron_2018-2019/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_CHEMINI_Total-Iron_2018-2019.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_CHEMINI_Total-Iron_2018-2019&showErrors=false&email= | Ifremer IPGP | EMSO-AZORES_CHEMINI_Total-Iron_2018-2019 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2019-2020.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2019-2020 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2019-2020.graph | EMSO-Azores, SeaMoN East : CHEMINI total dissolved iron concentrations, 2019-2020 | This dataset contains dissolved iron concentrations (Fe(II) + Fe(III), µmol/l) acquired between July 2019 and Septembre 2020 (n=1620) using the CHEMINI Fe, a CHEmical MINIaturized analyser (samples taken every 24 hours, with weekly in situ calibration using a 25 µmol/l iron standard, Vuillemin et al., 2009). The sample inlet was positioned on the mussel bed at the base of the Tour Eiffel edifice of the Lucky Strike hydrothermal vent (1695 depth). CHEMINI Fe (CF2) was mounted on the TEMPO module which was itself connected to the SeaMON East node of the EMSO-Azores observatory.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nIRON (Total iron, umol/l)\nIRON_QC (Total iron quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_CHEMINI_Total-Iron_2019-2020_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_CHEMINI_Total-Iron_2019-2020_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_CHEMINI_Total-Iron_2019-2020/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_CHEMINI_Total-Iron_2019-2020.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_CHEMINI_Total-Iron_2019-2020&showErrors=false&email= | Ifremer IPGP | EMSO-AZORES_CHEMINI_Total-Iron_2019-2020 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2013-2014.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2013-2014 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2013-2014.graph | EMSO-Azores, SeaMoN East : Temperature (°C) and dissolved oxygen concentrations (µmol/l) data, 2013-2014 | This dataset contains temperature (°C) and dissolved oxygen concentrations (µmol/l) acquired between August 2013 and July 2014 using an Aanderaa optode (model 3830, sensor head # 1180-520, salinity setting 3.5%, uncorrected for pressure) The sensor. The sensor was positioned on a mussel bed at the base of the Tour Eiffel edifice (1695m depth). Data was acquired every 15 minutes. A two-point calibration at 0% and 100% saturation levels is performed at each maintenance cruise. The optode connected to the TEMPO ecological module is part of the SeaMoN East monitoring node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nOSAT (Oxygen saturation, percent)\nOSAT_QC (Oxygen saturation quality flag)\nDOXY (Dissolved oxygen, umol/l)\nDOXY_QC (Dissolved oxygen quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_Seamon-East_Optode-O2_2013-2014_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_Seamon-East_Optode-O2_2013-2014_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_Seamon-East_Optode-O2_2013-2014/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_Seamon-East_Optode-O2_2013-2014.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Seamon-East_Optode-O2_2013-2014&showErrors=false&email= | Ifremer IPGP | EMSO-AZORES_Seamon-East_Optode-O2_2013-2014 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2015-2016.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2015-2016 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2015-2016.graph | EMSO-Azores, SeaMoN East : Temperature (°C) and dissolved oxygen concentrations (µmol/l) data, 2015-2016 | This dataset contains temperature (°C) and dissolved oxygen concentrations (µmol/l) acquired between April 2015 and September 2016 using an Aanderaa optode (model 3830, sensor head # 1180-520, salinity setting 3.5%, uncorrected for pressure) The sensor. The sensor was positioned on a mussel bed at the base of the Tour Eiffel edifice (1695m depth). Data was acquired every 15 minutes. A two-point calibration at 0% and 100% saturation levels is performed at each maintenance cruise. The optode connected to the TEMPO ecological module is part of the SeaMoN East monitoring node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nOSAT (Oxygen saturation, percent)\nOSAT_QC (Oxygen saturation quality flag)\nDOXY (Dissolved oxygen, umol/l)\nDOXY_QC (Dissolved oxygen quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_Seamon-East_Optode-O2_2015-2016_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_Seamon-East_Optode-O2_2015-2016_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_Seamon-East_Optode-O2_2015-2016/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_Seamon-East_Optode-O2_2015-2016.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Seamon-East_Optode-O2_2015-2016&showErrors=false&email= | Ifremer IPGP | EMSO-AZORES_Seamon-East_Optode-O2_2015-2016 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2016-2017.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2016-2017 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2016-2017.graph | EMSO-Azores, SeaMoN East : Temperature (°C) and dissolved oxygen concentrations (µmol/l) data, 2016-2017 (Tempo) | This dataset contains temperature (°C) and dissolved oxygen concentrations (µmol/l) (and the associated sensor raw data) acquired between September 2016 and February 2017 using an Aanderaa optode (model 4330, sensor head #2133, salinity setting 3.5%, uncorrected for pressure) The sensor. The sensor was positioned on a mussel bed at the base of the Tour Eiffel edifice (1695m depth). Data was acquired every 15 minutes. A two-point calibration at 0% and 100% saturation levels is performed at each maintenance cruise. The optode connected to the TEMPO ecological module is part of the SeaMoN East monitoring node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nOSAT (Oxygen saturation, percent)\nOSAT_QC (Oxygen saturation quality flag)\nDOXY (Dissolved oxygen, umol/l)\nDOXY_QC (Dissolved oxygen quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_Seamon-East_Optode-O2_2016-2017_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_Seamon-East_Optode-O2_2016-2017_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_Seamon-East_Optode-O2_2016-2017/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_Seamon-East_Optode-O2_2016-2017.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Seamon-East_Optode-O2_2016-2017&showErrors=false&email= | Ifremer IPGP | EMSO-AZORES_Seamon-East_Optode-O2_2016-2017 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2012-2013.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2012-2013 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2012-2013.graph | EMSO-Azores, SeaMoN East : Temperature (°C) and dissolved oxygen concentrations, 2012-2013 | This dataset contains temperature (°C) and dissolved oxygen concentrations (µmol/l) acquired between July 2012 and August 2013 using an Aanderaa optode (model 3830, sensor head # 1180-520, salinity setting 3.5%, uncorrected for pressure). The sensor was positioned on a mussel bed at the base of the Tour Eiffel edifice (1695m depth). Data was acquired every 15 minutes. A two-point calibration at 0% and 100% saturation levels is performed at each maintenance cruise. The optode connected to the TEMPO ecological module is part of the SeaMoN East monitoring node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nOSAT (Oxygen saturation, percent)\nOSAT_QC (Oxygen saturation quality flag)\nDOXY (Dissolved oxygen, umol/l)\nDOXY_QC (Dissolved oxygen quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_Seamon-East_Optode-O2_2012-2013_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_Seamon-East_Optode-O2_2012-2013_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_Seamon-East_Optode-O2_2012-2013/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_Seamon-East_Optode-O2_2012-2013.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Seamon-East_Optode-O2_2012-2013&showErrors=false&email= | Ifremer IPGP | EMSO-AZORES_Seamon-East_Optode-O2_2012-2013 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2011-2012.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2011-2012 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2011-2012.graph | EMSO-Azores, SeaMoN East : Turbidity (NTU) data, 2011-2012 | This dataset contains turbidity (Nephelometric Turbidity Units (NTU)) data acquired between July 2011 and July 2012 using a Wetlabs turbidimeter (ECO-BBRTD, serial # 215R) installed horizontally at 1.5 m height at the top of the SeaMoN East frame. The sensor was not calibrated as the sizes of the natural particles are unknown. Data was acquired every 15 minutes. The instrument is part of the SeaMoN East ecological monitoring node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTUR4 (Turbidity, NTU)\nTUR4_QC (Turbidity quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_Wetlabs_Turbidity_2011-2012_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_Wetlabs_Turbidity_2011-2012_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_Wetlabs_Turbidity_2011-2012/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_Wetlabs_Turbidity_2011-2012.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Wetlabs_Turbidity_2011-2012&showErrors=false&email= | Ifremer IPGP | EMSO-AZORES_Wetlabs_Turbidity_2011-2012 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2012-2013.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2012-2013 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2012-2013.graph | EMSO-Azores, SeaMoN East : Turbidity (NTU) data, 2012-2013 | This dataset contains turbidity (Nephelometric Turbidity Units (NTU)) data acquired between July 2012 and August 2013 using a Wetlabs turbidimeter (ECO-BBRTD, serial # 215R) installed horizontally at 1.5 m height at the top of the SeaMoN East frame. The sensor was not calibrated as the sizes of the natural particles are unknown. Data was acquired every 15 minutes. The instrument is part of the SeaMoN East ecological monitoring node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTUR4 (Turbidity, NTU)\nTUR4_QC (Turbidity quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_Wetlabs_Turbidity_2012-2013_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_Wetlabs_Turbidity_2012-2013_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_Wetlabs_Turbidity_2012-2013/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_Wetlabs_Turbidity_2012-2013.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Wetlabs_Turbidity_2012-2013&showErrors=false&email= | Ifremer IPGP | EMSO-AZORES_Wetlabs_Turbidity_2012-2013 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2013-2014.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2013-2014 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2013-2014.graph | EMSO-Azores, SeaMoN East : Turbidity (NTU) data, 2013-2014 | This dataset contains turbidity (Nephelometric Turbidity Units (NTU)) data acquired between August 2013 and July 2014 using a Wetlabs turbidimeter (ECO-BBRTD, serial # 215R) installed horizontally at 1.5 m height at the top of the SeaMoN East frame. The sensor was not calibrated as the sizes of the natural particles are unknown. Data was acquired every 15 minutes. The instrument is part of the SeaMoN East ecological monitoring node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTUR4 (Turbidity, NTU)\nTUR4_QC (Turbidity quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_Wetlabs_Turbidity_2013-2014_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_Wetlabs_Turbidity_2013-2014_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_Wetlabs_Turbidity_2013-2014/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_Wetlabs_Turbidity_2013-2014.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Wetlabs_Turbidity_2013-2014&showErrors=false&email= | Ifremer IPGP | EMSO-AZORES_Wetlabs_Turbidity_2013-2014 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2015-2016.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2015-2016 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2015-2016.graph | EMSO-Azores, SeaMoN East : Turbidity (NTU) data, 2015-2016 | This dataset contains turbidity (Nephelometric Turbidity Units (NTU)) data acquired between April 2015 and September 2016 using a Wetlabs turbidimeter (ECO-BBRTD, serial # 215R) installed horizontally at 1.5 m height at the top of the SeaMoN East frame. The sensor was not calibrated as the sizes of the natural particles are unknown. Data was acquired every 15 minutes. The instrument is part of the SeaMoN East ecological monitoring node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTUR4 (Turbidity, NTU)\nTUR4_QC (Turbidity quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_Wetlabs_Turbidity_2015-2016_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_Wetlabs_Turbidity_2015-2016_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_Wetlabs_Turbidity_2015-2016/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_Wetlabs_Turbidity_2015-2016.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Wetlabs_Turbidity_2015-2016&showErrors=false&email= | Ifremer IPGP | EMSO-AZORES_Wetlabs_Turbidity_2015-2016 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2016-2017.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2016-2017 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2016-2017.graph | EMSO-Azores, SeaMoN East : Turbidity (NTU) data, 2016-2017 | This dataset contains turbidity (Nephelometric Turbidity Units (NTU)) data acquired between September 2016 and February 2017 using a Wetlabs turbidimeter (ECO-BBRTD, serial # 215R) installed horizontally at 1.5 m height at the top of the SeaMoN East frame. The sensor was not calibrated as the sizes of the natural particles are unknown. Data was acquired every 15 minutes. The instrument is part of the SeaMoN East ecological monitoring node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTUR4 (Turbidity, NTU)\nTUR4_QC (Turbidity quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_Wetlabs_Turbidity_2016-2017_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_Wetlabs_Turbidity_2016-2017_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_Wetlabs_Turbidity_2016-2017/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_Wetlabs_Turbidity_2016-2017.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Wetlabs_Turbidity_2016-2017&showErrors=false&email= | Ifremer IPGP | EMSO-AZORES_Wetlabs_Turbidity_2016-2017 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2017-2018.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2017-2018 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2017-2018.graph | EMSO-Azores, SeaMoN East : Turbidity (NTU) data, 2017-2018 | This dataset contains turbidity (Nephelometric Turbidity Units (NTU)) data acquired between July 2017 and July 2018 using a Wetlabs turbidimeter (ECO-BBRTD, serial # 215R) installed horizontally at 1.5 m height at the top of the SeaMoN East frame. The sensor was not calibrated as the sizes of the natural particles are unknown. Data was acquired every 15 minutes. The instrument is part of the SeaMoN East ecological monitoring node deployed at ca 10m away from the active hydrothermal edifice Tour Eiffel.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTUR4 (Turbidity, NTU)\nTUR4_QC (Turbidity quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_Wetlabs_Turbidity_2017-2018_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_Wetlabs_Turbidity_2017-2018_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_Wetlabs_Turbidity_2017-2018/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_Wetlabs_Turbidity_2017-2018.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Wetlabs_Turbidity_2017-2018&showErrors=false&email= | Ifremer IPGP | EMSO-AZORES_Wetlabs_Turbidity_2017-2018 |