Ifremer ERDDAP
Easier access to scientific data
 
 
griddap Subset tabledap Make A Graph wms files Title Summary FGDC ISO 19115 Info Background Info RSS Email Institution Dataset ID
https://erddap.emso-fr.org/erddap/tabledap/Emso_Azores_Chemini_IRON.subset https://erddap.emso-fr.org/erddap/tabledap/Emso_Azores_Chemini_IRON https://erddap.emso-fr.org/erddap/tabledap/Emso_Azores_Chemini_IRON.graph EMSO Azores Seamon-East Chemini dissolved iron concentration This dataset contains dissolved iron concentrations ((Fe(II) + Fe(III); µmol/l) acquired between September 2013 and July 2017 using the CHEMINI Fe, a CHEmical MINIaturized analyser (samples taken every 12 hours, with daily in situ calibration using a 20 µmol/l iron standard, Vuillemin et al., 2009). The sample inlet was positioned on the mussel bed at the base of the Tour Eiffel edifice of the Lucky Strike hydrothermal vent (1695 depth).CHEMINI Fe (CF2) was mounted on the TEMPO module which was itself connected to the SeaMON East node of the EMSO-Azores observatory. Measured properties: temperature and Total dissolved iron concentration\n\ncdm_data_type = TimeSeries\nVARIABLES:\nplatform_code\nplatform_name\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_Celsius)\nTEMP_QC (Sea temperature quality flag)\nIRON (Total iron, millimole/m3)\nIRON_QC (Total iron quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/Emso_Azores_Chemini_IRON_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/Emso_Azores_Chemini_IRON_iso19115.xml https://erddap.emso-fr.org/erddap/info/Emso_Azores_Chemini_IRON/index.htmlTable http://www.oceansites.org (external link) https://erddap.emso-fr.org/erddap/rss/Emso_Azores_Chemini_IRON.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=Emso_Azores_Chemini_IRON&showErrors=false&email= Ifremer Institut Francais de Recherche pour l'Exploitation de la Mer Emso_Azores_Chemini_IRON
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2016-2017.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2016-2017 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2016-2017.graph EMSO Azores TCM3-1 Ocean Bottom Tilt Current Meter : 2016-2017 The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-1_2016-2017_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-1_2016-2017_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-1_2016-2017/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-1_2016-2017.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-1_2016-2017&showErrors=false&email= IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer EMSO-AZORES_TCM3-1_2016-2017
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2017-2018.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2017-2018 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2017-2018.graph EMSO Azores TCM3-1 Ocean Bottom Tilt Current Meter : 2017-2018 The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-1_2017-2018_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-1_2017-2018_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-1_2017-2018/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-1_2017-2018.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-1_2017-2018&showErrors=false&email= IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer EMSO-AZORES_TCM3-1_2017-2018
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2018-2019.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2018-2019 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2018-2019.graph EMSO Azores TCM3-1 Ocean Bottom Tilt Current Meter : 2018-2019 The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-1_2018-2019_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-1_2018-2019_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-1_2018-2019/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-1_2018-2019.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-1_2018-2019&showErrors=false&email= IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer EMSO-AZORES_TCM3-1_2018-2019
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2021-2022.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2021-2022 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2021-2022.graph EMSO Azores TCM3-1 Ocean Bottom Tilt Current Meter : 2021-2022 The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-1_2021-2022_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-1_2021-2022_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-1_2021-2022/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-1_2021-2022.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-1_2021-2022&showErrors=false&email= IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer EMSO-AZORES_TCM3-1_2021-2022
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2017-2018.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2017-2018 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2017-2018.graph EMSO Azores TCM3-2 Ocean Bottom Tilt Current Meter : 2017-2018 The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-2_2017-2018_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-2_2017-2018_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-2_2017-2018/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-2_2017-2018.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-2_2017-2018&showErrors=false&email= IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer EMSO-AZORES_TCM3-2_2017-2018
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2018-2019.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2018-2019 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2018-2019.graph EMSO Azores TCM3-2 Ocean Bottom Tilt Current Meter : 2018-2019 The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-2_2018-2019_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-2_2018-2019_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-2_2018-2019/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-2_2018-2019.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-2_2018-2019&showErrors=false&email= IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer EMSO-AZORES_TCM3-2_2018-2019
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2019-2020.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2019-2020 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2019-2020.graph EMSO Azores TCM3-2 Ocean Bottom Tilt Current Meter : 2019-2020 The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-2_2019-2020_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-2_2019-2020_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-2_2019-2020/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-2_2019-2020.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-2_2019-2020&showErrors=false&email= IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer EMSO-AZORES_TCM3-2_2019-2020
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2020-2021.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2020-2021 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2020-2021.graph EMSO Azores TCM3-2 Ocean Bottom Tilt Current Meter : 2020-2021 The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-2_2020-2021_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-2_2020-2021_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-2_2020-2021/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-2_2020-2021.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-2_2020-2021&showErrors=false&email= IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer EMSO-AZORES_TCM3-2_2020-2021
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2016-2017.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2016-2017 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2016-2017.graph EMSO Azores TCM3-3 Ocean Bottom Tilt Current Meter : 2016-2017 The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-3_2016-2017_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-3_2016-2017_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-3_2016-2017/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-3_2016-2017.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-3_2016-2017&showErrors=false&email= IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer EMSO-AZORES_TCM3-3_2016-2017
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2017-2018.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2017-2018 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2017-2018.graph EMSO Azores TCM3-3 Ocean Bottom Tilt Current Meter : 2017-2018 The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-3_2017-2018_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-3_2017-2018_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-3_2017-2018/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-3_2017-2018.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-3_2017-2018&showErrors=false&email= IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer EMSO-AZORES_TCM3-3_2017-2018
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2018-2019.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2018-2019 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2018-2019.graph EMSO Azores TCM3-3 Ocean Bottom Tilt Current Meter : 2018-2019 The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-3_2018-2019_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-3_2018-2019_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-3_2018-2019/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-3_2018-2019.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-3_2018-2019&showErrors=false&email= IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer EMSO-AZORES_TCM3-3_2018-2019
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2019-2020.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2019-2020 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2019-2020.graph EMSO Azores TCM3-3 Ocean Bottom Tilt Current Meter : 2019-2020 The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-3_2019-2020_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-3_2019-2020_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-3_2019-2020/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-3_2019-2020.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-3_2019-2020&showErrors=false&email= IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer EMSO-AZORES_TCM3-3_2019-2020
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2020-2021.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2020-2021 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2020-2021.graph EMSO Azores TCM3-3 Ocean Bottom Tilt Current Meter : 2020-2021 The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-3_2020-2021_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-3_2020-2021_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-3_2020-2021/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-3_2020-2021.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-3_2020-2021&showErrors=false&email= IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer EMSO-AZORES_TCM3-3_2020-2021
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2021-2022.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2021-2022 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2021-2022.graph EMSO Azores TCM3-3 Ocean Bottom Tilt Current Meter : 2021-2022 The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-3_2021-2022_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-3_2021-2022_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-3_2021-2022/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-3_2021-2022.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-3_2021-2022&showErrors=false&email= IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer EMSO-AZORES_TCM3-3_2021-2022
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-A_2020-2021.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-A_2020-2021 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-A_2020-2021.graph EMSO Azores TCM3-A Ocean Bottom Tilt Current Meter : 2020-2021 The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-A_2020-2021_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-A_2020-2021_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-A_2020-2021/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-A_2020-2021.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-A_2020-2021&showErrors=false&email= IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer EMSO-AZORES_TCM3-A_2020-2021
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-B_2020-2021.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-B_2020-2021 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-B_2020-2021.graph EMSO Azores TCM3-B Ocean Bottom Tilt Current Meter : 2020-2021 The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-B_2020-2021_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-B_2020-2021_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-B_2020-2021/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-B_2020-2021.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-B_2020-2021&showErrors=false&email= IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer EMSO-AZORES_TCM3-B_2020-2021
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-B_2021-2022.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-B_2021-2022 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-B_2021-2022.graph EMSO Azores TCM3-B Ocean Bottom Tilt Current Meter : 2021-2022 The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-B_2021-2022_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-B_2021-2022_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-B_2021-2022/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-B_2021-2022.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-B_2021-2022&showErrors=false&email= IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer EMSO-AZORES_TCM3-B_2021-2022
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-C_2020-2021.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-C_2020-2021 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-C_2020-2021.graph EMSO Azores TCM3-C Ocean Bottom Tilt Current Meter : 2020-2021 The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-C_2020-2021_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-C_2020-2021_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-C_2020-2021/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-C_2020-2021.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-C_2020-2021&showErrors=false&email= IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer EMSO-AZORES_TCM3-C_2020-2021
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-C_2021-2022.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-C_2021-2022 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-C_2021-2022.graph EMSO Azores TCM3-C Ocean Bottom Tilt Current Meter : 2021-2022 The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-C_2021-2022_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-C_2021-2022_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-C_2021-2022/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-C_2021-2022.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-C_2021-2022&showErrors=false&email= IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer EMSO-AZORES_TCM3-C_2021-2022
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-D_2020-2021.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-D_2020-2021 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-D_2020-2021.graph EMSO Azores TCM3-D Ocean Bottom Tilt Current Meter : 2020-2021 The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-D_2020-2021_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-D_2020-2021_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-D_2020-2021/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-D_2020-2021.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-D_2020-2021&showErrors=false&email= IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer EMSO-AZORES_TCM3-D_2020-2021
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-D_2021-2022.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-D_2021-2022 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-D_2021-2022.graph EMSO Azores TCM3-D Ocean Bottom Tilt Current Meter : 2021-2022 The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-D_2021-2022_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-D_2021-2022_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-D_2021-2022/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-D_2021-2022.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-D_2021-2022&showErrors=false&email= IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer EMSO-AZORES_TCM3-D_2021-2022
https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Dyfamed_FCO2TW.subset https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Dyfamed_FCO2TW https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Dyfamed_FCO2TW.graph EMSO Ligure Dyfamed carbon data Data collected from Global Telecommunications System (GTS) buoy messages\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\nDC_REFERENCE (Station/Location unique identifier in data centre)\ndepth (m)\nDEPH_QC (quality flag)\nDEPH_DM (method of data processing)\nWSPD (Horizontal wind speed, meter/second)\nWSPD_QC (quality flag)\nWSPD_DM (method of data processing)\nATMP (Atmospheric pressure at altitude, hectopascal)\nATMP_QC (quality flag)\nATMP_DM (method of data processing)\nFCO2 (CO2 fugacity, microatmosphere)\nFCO2_QC (quality flag)\nFCO2_DM (method of data processing)\nTEMP (Sea temperature, degree_Celsius)\nTEMP_QC (quality flag)\nTEMP_DM (method of data processing)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/Emso_Ligure_Dyfamed_FCO2TW_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/Emso_Ligure_Dyfamed_FCO2TW_iso19115.xml https://erddap.emso-fr.org/erddap/info/Emso_Ligure_Dyfamed_FCO2TW/index.htmlTable http://www.obs-vlfr.fr/sodyf (external link) https://erddap.emso-fr.org/erddap/rss/Emso_Ligure_Dyfamed_FCO2TW.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=Emso_Ligure_Dyfamed_FCO2TW&showErrors=false&email= LOV Laboratoire Oceanographique de Villefranche Emso_Ligure_Dyfamed_FCO2TW
https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Dyfamed_TSCTD.subset https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Dyfamed_TSCTD https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Dyfamed_TSCTD.graph EMSO Ligure Dyfamed mooring CTD data Temperature, conductivity and pressure data collected from OceanSites/EMSO moorings\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (Depth of each measurement, m)\nTEMP (Sea temperature, degree_Celsius)\nTEMP_QC (quality flag)\nPRES (Sea pressure, decibar)\nPRES_QC (quality flag)\nDOX2 (Dissolved oxygen, micromole/kg)\nDOX2_QC (quality flag)\nPSAL (Practical salinity, PSU)\nPSAL_QC (quality flag)\nEWCT (West-east current component, meter/second)\nEWCT_QC (quality flag)\nHCSP (Horizontal current speed, meter/second)\nHCSP_QC (quality flag)\nHCDT (Current to direction relative true north, degree)\nHCDT_QC (quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/Emso_Ligure_Dyfamed_TSCTD_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/Emso_Ligure_Dyfamed_TSCTD_iso19115.xml https://erddap.emso-fr.org/erddap/info/Emso_Ligure_Dyfamed_TSCTD/index.htmlTable http://www.insu.cnrs.fr/environnement/atmosphere/moose-mediterranean-ocean-observing-system-on-environment (external link) https://erddap.emso-fr.org/erddap/rss/Emso_Ligure_Dyfamed_TSCTD.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=Emso_Ligure_Dyfamed_TSCTD&showErrors=false&email= Observatoire Océanologique de Villefranche-sur-Mer Emso_Ligure_Dyfamed_TSCTD
https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Dyfamed_TScurrents.subset https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Dyfamed_TScurrents https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Dyfamed_TScurrents.graph EMSO Ligure Dyfamed mooring currentmeter data Temperature, conductivity and pressure data collected from MOOSE moorings\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (Depth of each measurement, m)\nTEMP (Sea temperature, degree_Celsius)\nTEMP_QC (quality flag)\nPRES (Sea pressure, decibar)\nPRES_QC (quality flag)\nHCSP (Horizontal current speed, meter/second)\nHCSP_QC (quality flag)\nHCDT (Current to direction relative true north, degree)\nHCDT_QC (quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/Emso_Ligure_Dyfamed_TScurrents_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/Emso_Ligure_Dyfamed_TScurrents_iso19115.xml https://erddap.emso-fr.org/erddap/info/Emso_Ligure_Dyfamed_TScurrents/index.htmlTable http://www.insu.cnrs.fr/environnement/atmosphere/moose-mediterranean-ocean-observing-system-on-environment (external link) https://erddap.emso-fr.org/erddap/rss/Emso_Ligure_Dyfamed_TScurrents.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=Emso_Ligure_Dyfamed_TScurrents&showErrors=false&email= Observatoire Océanologique de Villefranche-sur-Mer Emso_Ligure_Dyfamed_TScurrents
https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Dyfamed_SedimentTrap.subset https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Dyfamed_SedimentTrap https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Dyfamed_SedimentTrap.graph EMSO Ligure Dyfamed mooring sediment traps Temperature, conductivity and pressure data collected from MOOSE moorings\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\ndepth (Depth of each measurement, m)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\nTCCF (Particulate total carbon mass flux, milligram/m2/day)\nTCCF_QC (quality flag)\nTNNF (Particulate total nitrogen mass flux, milligram/m2/day)\nTNNF_QC (quality flag)\nPOCF (Particulate organic carbon mass flux, milligram/m2/day)\nPOCF_QC (quality flag)\nTSMF (Particulate total mass flux, milligram/m2/day)\nTSMF_QC (quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/Emso_Ligure_Dyfamed_SedimentTrap_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/Emso_Ligure_Dyfamed_SedimentTrap_iso19115.xml https://erddap.emso-fr.org/erddap/info/Emso_Ligure_Dyfamed_SedimentTrap/index.htmlTable http://www.insu.cnrs.fr/environnement/atmosphere/moose-mediterranean-ocean-observing-system-on-environment (external link) https://erddap.emso-fr.org/erddap/rss/Emso_Ligure_Dyfamed_SedimentTrap.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=Emso_Ligure_Dyfamed_SedimentTrap&showErrors=false&email= Observatoire Océanologique de Villefranche-sur-Mer Emso_Ligure_Dyfamed_SedimentTrap
https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Dyfamed_TSO2.subset https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Dyfamed_TSO2 https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Dyfamed_TSO2.graph EMSO Ligure Dyfamed oxygen data DYFAMED Time Series from 1994 to 2014 (43°25N - 7°52E). In the framework of the French MOOSE program, a fixed point observatory in the Ligurian Sea (so called DYFAMED) performs since 1991 physical, biogeochemical and biological observations of the water column structure. This observatory is hosted and managed by the Oceanological Observatory in Villefranche-sur-Mer (CNRS-SU)\n\ncdm_data_type = Point\nVARIABLES:\ntime (time of measurement, seconds since 1970-01-01T00:00:00Z)\nlongitude (longitude of measurement, degrees_east)\nlatitude (latitude of measurement, degrees_north)\nPRES (Sea water pressure, equals 0 at sea-level, decibar)\nTEMP (Sea temperature in-situ ITS-90 scale, degree_Celsius)\nPSAL (Practical salinity, PSU)\nDOXY (Dissolved oxygen, micromole/kg)\nTIME_QC (quality flag for TIME)\nPOSITION_QC (quality flag for LATITUDE and LONGITUDE)\nPRES_QC (quality flag for PRES)\nTEMP_QC (quality flag for TEMP)\nPSAL_QC (quality flag for PSAL)\nDOXY_QC (quality flag for DOXY)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/Emso_Ligure_Dyfamed_TSO2_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/Emso_Ligure_Dyfamed_TSO2_iso19115.xml https://erddap.emso-fr.org/erddap/info/Emso_Ligure_Dyfamed_TSO2/index.htmlTable ??? https://erddap.emso-fr.org/erddap/rss/Emso_Ligure_Dyfamed_TSO2.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=Emso_Ligure_Dyfamed_TSO2&showErrors=false&email= IMEV Villefranche-sur-mer Emso_Ligure_Dyfamed_TSO2
https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Dyfamed_TSOF.subset https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Dyfamed_TSOF https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Dyfamed_TSOF.graph EMSO Ligure Dyfamed oxygen/fluorescence data LABORATOIRE OCEANOGRAPHIQUE DE VILLEFRANCHE data from a local source.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (Depth of each measurement, m)\nPRES (sea water pressure, decibar)\nPRES_QC (quality flag)\nPSAL (practical salinity, PSU)\nPSAL_QC (quality flag)\nTEMP (sea water temperature in-situ ITS-90 scale, degree_Celsius)\nTEMP_QC (quality flag)\nDOX1 (DISSOLVED OXYGEN, ml/l)\nDOX1_QC (quality flag)\nFLUO (fluorescence, relative unit)\nFLUO_QC (quality flag)\nDOX2\nDOX2_QC (quality flag)\nFLU2 (fluorescence, milligram/m3)\nFLU2_QC (quality flag)\nOSAT\nOSAT_QC (quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/Emso_Ligure_Dyfamed_TSOF_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/Emso_Ligure_Dyfamed_TSOF_iso19115.xml https://erddap.emso-fr.org/erddap/info/Emso_Ligure_Dyfamed_TSOF/index.htmlTable http://www.eurosites.info (external link) https://erddap.emso-fr.org/erddap/rss/Emso_Ligure_Dyfamed_TSOF.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=Emso_Ligure_Dyfamed_TSOF&showErrors=false&email= LABORATOIRE OCEANOGRAPHIQUE DE VILLEFRANCHE Emso_Ligure_Dyfamed_TSOF
https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Real_Time.subset https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Real_Time https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Real_Time.graph EMSO Ligure Dyfamed real-time observations Data collected from Global Telecommunications System (GTS) buoy messages\n\ncdm_data_type = TimeSeries\nVARIABLES:\nplatform_code\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\nDC_REFERENCE (Station/Location unique identifier in data centre)\ndepth (m)\nDEPH_QC (quality flag)\nDEPH_DM (method of data processing)\nDEWT (Dew point temperature, degree_Celsius)\nDEWT_QC (quality flag)\nDEWT_DM (method of data processing)\nTEMP (Sea temperature, degree_Celsius)\nTEMP_QC (quality flag)\nTEMP_DM (method of data processing)\nATMS (Atmospheric pressure at sea level, hectopascal)\nATMS_QC (quality flag)\nATMS_DM (method of data processing)\nATPT (Atmospheric pressure hourly tendency, hectopascal/hour)\nATPT_QC (quality flag)\nATPT_DM (method of data processing)\nSWHT (SWELL HEIGHT, meter)\nSWHT_QC (quality flag)\nSWHT_DM (method of data processing)\nWDIR (Wind from direction relative true north, degree)\nWDIR_QC (quality flag)\nWDIR_DM (method of data processing)\n... (12 more variables)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/Emso_Ligure_Real_Time_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/Emso_Ligure_Real_Time_iso19115.xml https://erddap.emso-fr.org/erddap/info/Emso_Ligure_Real_Time/index.htmlTable http://www.obs-vlfr.fr/sodyf (external link) https://erddap.emso-fr.org/erddap/rss/Emso_Ligure_Real_Time.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=Emso_Ligure_Real_Time&showErrors=false&email= Meteo-France Emso_Ligure_Real_Time
https://erddap.emso-fr.org/erddap/tabledap/OS_DYFAMED_1994-2014_D_TSO.subset https://erddap.emso-fr.org/erddap/tabledap/OS_DYFAMED_1994-2014_D_TSO https://erddap.emso-fr.org/erddap/tabledap/OS_DYFAMED_1994-2014_D_TSO.graph EMSO Ligure Dyfamed Time Series from 1994 to 2014 (43º25N - 7°52E) DYFAMED Time Series from 1994 to 2014 (43°25N - 7°52E). In the framework of the French MOOSE program, a fixed point observatory in the Ligurian Sea (so called DYFAMED) performs since 1991 physical, biogeochemical and biological observations of the water column structure. This observatory is hosted and managed by the Oceanological Observatory in Villefranche-sur-Mer (CNRS-SU)\n\ncdm_data_type = Profile\nVARIABLES:\ntime (time of measurement, seconds since 1970-01-01T00:00:00Z)\nlatitude (latitude of measurement, degrees_north)\nlongitude (longitude of measurement, degrees_east)\nPRES (Sea water pressure, equals 0 at sea-level, decibar)\nTEMP (Sea temperature in-situ ITS-90 scale, degree_Celsius)\nPSAL (Practical salinity, PSU)\nDOXY (Dissolved oxygen, micromole/kg)\nTIME_QC (quality flag for TIME)\nPOSITION_QC (quality flag for LATITUDE and LONGITUDE)\nPRES_QC (quality flag for PRES)\nTEMP_QC (quality flag for TEMP)\nPSAL_QC (quality flag for PSAL)\nDOXY_QC (quality flag for DOXY)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/OS_DYFAMED_1994-2014_D_TSO_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/OS_DYFAMED_1994-2014_D_TSO_iso19115.xml https://erddap.emso-fr.org/erddap/info/OS_DYFAMED_1994-2014_D_TSO/index.htmlTable ??? https://erddap.emso-fr.org/erddap/rss/OS_DYFAMED_1994-2014_D_TSO.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=OS_DYFAMED_1994-2014_D_TSO&showErrors=false&email= IMEV Villefranche-sur-mer OS_DYFAMED_1994-2014_D_TSO
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_SBE53_East_2016_2017.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_SBE53_East_2016_2017 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_SBE53_East_2016_2017.graph EMSO-Azores : Seafloor pressure data from two SBE53 pressure gauges, 2016-2017 This dataset contains seafloor pressure data acquired in the framework of EMSO-Azores observatory between September 2016 and July 2017 using a SBE53 pressure gauges deployed on two sites.\nWest site : The sensor was deployed on an existing benchmark installed with the submersible Nautile in August 2006 during the GRAVILUCK cruise (https://doi.org/10.17600/6010110). The benchmark sits on hard substratum with light hydrothermal sedimentation, on the North-West border of the Lucky Strike lava lake, next to a hydrothermal site.\nEast site : The sensor was deployed on an existing benchmark installed by freefall in July 2007 during the MOMARDREAM cruise (https://doi.org/10.17600/7030060). The benchmark sits in the axial valley, East of the LuckyStrike volcano in a lightly sedimented area, with apparent pillow lavas.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nPRES (Sea pressure, dbar)\nPRES_QC (Sea pressure quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_SBE53_East_2016_2017_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_SBE53_East_2016_2017_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_SBE53_East_2016_2017/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_SBE53_East_2016_2017.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_SBE53_East_2016_2017&showErrors=false&email= LIENSs IPGP Ifremer EMSO-AZORES_SBE53_East_2016_2017
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_SBE53_West_2016_2017.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_SBE53_West_2016_2017 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_SBE53_West_2016_2017.graph EMSO-Azores : Seafloor pressure data from two SBE53 pressure gauges, 2016-2017 This dataset contains seafloor pressure data acquired in the framework of EMSO-Azores observatory between September 2016 and July 2017 using a SBE53 pressure gauges deployed on two sites.\nWest site : The sensor was deployed on an existing benchmark installed with the submersible Nautile in August 2006 during the GRAVILUCK cruise (https://doi.org/10.17600/6010110). The benchmark sits on hard substratum with light hydrothermal sedimentation, on the North-West border of the Lucky Strike lava lake, next to a hydrothermal site.\nEast site : The sensor was deployed on an existing benchmark installed by freefall in July 2007 during the MOMARDREAM cruise (https://doi.org/10.17600/7030060). The benchmark sits in the axial valley, East of the LuckyStrike volcano in a lightly sedimented area, with apparent pillow lavas.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nPRES (Sea pressure, dbar)\nPRES_QC (Sea pressure quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_SBE53_West_2016_2017_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_SBE53_West_2016_2017_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_SBE53_West_2016_2017/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_SBE53_West_2016_2017.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_SBE53_West_2016_2017&showErrors=false&email= LIENSs IPGP Ifremer EMSO-AZORES_SBE53_West_2016_2017
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_SBE53_East_2018_2019.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_SBE53_East_2018_2019 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_SBE53_East_2018_2019.graph EMSO-Azores : Seafloor pressure data from two SBE53 pressure gauges, 2018-2019 This dataset contains seafloor pressure data acquired in the framework of EMSO-Azores observatory between August 2018 and June 2019 using a SBE53 pressure gauges deployed on two sites.\nWest site : The sensor was deployed on an existing benchmark installed with the submersible Nautile in August 2006 during the GRAVILUCK cruise (https://doi.org/10.17600/6010110). The benchmark sits on hard substratum with light hydrothermal sedimentation, on the North-West border of the Lucky Strike lava lake, next to a hydrothermal site.\nEast site : The sensor was deployed on an existing benchmark installed by freefall in July 2007 during the MOMARDREAM cruise (https://doi.org/10.17600/7030060). The benchmark sits in the axial valley, East of the LuckyStrike volcano in a lightly sedimented area, with apparent pillow lavas.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nPRES (Sea pressure, dbar)\nPRES_QC (Sea pressure quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_SBE53_East_2018_2019_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_SBE53_East_2018_2019_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_SBE53_East_2018_2019/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_SBE53_East_2018_2019.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_SBE53_East_2018_2019&showErrors=false&email= LIENSs IPGP Ifremer EMSO-AZORES_SBE53_East_2018_2019
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_SBE53_West_2018_2019.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_SBE53_West_2018_2019 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_SBE53_West_2018_2019.graph EMSO-Azores : Seafloor pressure data from two SBE53 pressure gauges, 2018-2019 This dataset contains seafloor pressure data acquired in the framework of EMSO-Azores observatory between August 2018 and June 2019 using a SBE53 pressure gauges deployed on two sites.\nWest site : The sensor was deployed on an existing benchmark installed with the submersible Nautile in August 2006 during the GRAVILUCK cruise (https://doi.org/10.17600/6010110). The benchmark sits on hard substratum with light hydrothermal sedimentation, on the North-West border of the Lucky Strike lava lake, next to a hydrothermal site.\nEast site : The sensor was deployed on an existing benchmark installed by freefall in July 2007 during the MOMARDREAM cruise (https://doi.org/10.17600/7030060). The benchmark sits in the axial valley, East of the LuckyStrike volcano in a lightly sedimented area, with apparent pillow lavas.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nPRES (Sea pressure, dbar)\nPRES_QC (Sea pressure quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_SBE53_West_2018_2019_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_SBE53_West_2018_2019_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_SBE53_West_2018_2019/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_SBE53_West_2018_2019.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_SBE53_West_2018_2019&showErrors=false&email= LIENSs IPGP Ifremer EMSO-AZORES_SBE53_West_2018_2019
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_SBE53_East_2019_2020.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_SBE53_East_2019_2020 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_SBE53_East_2019_2020.graph EMSO-Azores : Seafloor pressure data from two SBE53 pressure gauges, 2019-2020 This dataset contains seafloor pressure data acquired in the framework of EMSO-Azores observatory between June 2019 and September 2020 using SBE53 pressure gauges deployed on two sites.\nWest site : The sensor was deployed on an existing benchmark installed with the submersible Nautile in August 2006 during the GRAVILUCK cruise (https://doi.org/10.17600/6010110). The benchmark sits on hard substratum with light hydrothermal sedimentation, on the North-West border of the Lucky Strike lava lake, next to a hydrothermal site.\nEast site : The sensor was deployed on an existing benchmark installed by freefall in July 2007 during the MOMARDREAM cruise (https://doi.org/10.17600/7030060). The benchmark sits in the axial valley, East of the LuckyStrike volcano in a lightly sedimented area, with apparent pillow lavas.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nPRES (Sea pressure, dbar)\nPRES_QC (Sea pressure quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_SBE53_East_2019_2020_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_SBE53_East_2019_2020_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_SBE53_East_2019_2020/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_SBE53_East_2019_2020.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_SBE53_East_2019_2020&showErrors=false&email= LIENSs IPGP Ifremer EMSO-AZORES_SBE53_East_2019_2020
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_SBE53_West_2019_2020.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_SBE53_West_2019_2020 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_SBE53_West_2019_2020.graph EMSO-Azores : Seafloor pressure data from two SBE53 pressure gauges, 2019-2020 This dataset contains seafloor pressure data acquired in the framework of EMSO-Azores observatory between June 2019 and September 2020 using SBE53 pressure gauges deployed on two sites.\nWest site : The sensor was deployed on an existing benchmark installed with the submersible Nautile in August 2006 during the GRAVILUCK cruise (https://doi.org/10.17600/6010110). The benchmark sits on hard substratum with light hydrothermal sedimentation, on the North-West border of the Lucky Strike lava lake, next to a hydrothermal site.\nEast site : The sensor was deployed on an existing benchmark installed by freefall in July 2007 during the MOMARDREAM cruise (https://doi.org/10.17600/7030060). The benchmark sits in the axial valley, East of the LuckyStrike volcano in a lightly sedimented area, with apparent pillow lavas.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nPRES (Sea pressure, dbar)\nPRES_QC (Sea pressure quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_SBE53_West_2019_2020_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_SBE53_West_2019_2020_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_SBE53_West_2019_2020/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_SBE53_West_2019_2020.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_SBE53_West_2019_2020&showErrors=false&email= LIENSs IPGP Ifremer EMSO-AZORES_SBE53_West_2019_2020
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2010-2011.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2010-2011 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2010-2011.graph EMSO-Azores, BOREL : Meteorological unit 1 data, 2010-2011 This dataset contains the meteorological parameters (mean wind speed, temperature in °C and atmospheric pressure in hPa) acquired in july 2011 using the Furuno Rowind+, mounted at the top of BOREL superstructure (data acquired every 6 hours).\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nWDIR (Wind from direction relative true north, deg T)\nWDIR_QC (Wind from direction relative true north quality flag)\nWSPD (Horizontal wind speed, m/s)\nWSPD_QC (Horizontal wind speed quality flag)\nATMS (Atmospheric pressure at sea level, mBar)\nATMS_QC (Atmospheric pressure at sea level quality flag)\nDRYT (Air temperature in dry bulb, degree_C)\nDRYT_QC (Air temperature in dry bulb quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_Borel_Meteo-Unit-1_2010-2011_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_Borel_Meteo-Unit-1_2010-2011_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_Borel_Meteo-Unit-1_2010-2011/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_Borel_Meteo-Unit-1_2010-2011.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Borel_Meteo-Unit-1_2010-2011&showErrors=false&email= Ifremer IPGP EMSO-AZORES_Borel_Meteo-Unit-1_2010-2011
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2011-2012.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2011-2012 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2011-2012.graph EMSO-Azores, BOREL : Meteorological unit 1 data, 2011-2012 This dataset contains the meteorological parameters (mean wind speed, temperature in °C and atmospheric pressure in mbar) acquired between July 2011 and July 2012 (n=2826) using the Furuno Rowind+, mounted at the top of BOREL superstructure (data acquired every 6 hours).\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nWDIR (Wind from direction relative true north, deg T)\nWDIR_QC (Wind from direction relative true north quality flag)\nWSPD (Horizontal wind speed, m/s)\nWSPD_QC (Horizontal wind speed quality flag)\nATMS (Atmospheric pressure at sea level, mBar)\nATMS_QC (Atmospheric pressure at sea level quality flag)\nDRYT (Air temperature in dry bulb, degree_C)\nDRYT_QC (Air temperature in dry bulb quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_Borel_Meteo-Unit-1_2011-2012_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_Borel_Meteo-Unit-1_2011-2012_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_Borel_Meteo-Unit-1_2011-2012/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_Borel_Meteo-Unit-1_2011-2012.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Borel_Meteo-Unit-1_2011-2012&showErrors=false&email= Ifremer IPGP EMSO-AZORES_Borel_Meteo-Unit-1_2011-2012
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2012-2013.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2012-2013 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2012-2013.graph EMSO-Azores, BOREL : Meteorological unit 1 data, 2012-2013 This dataset contains the meteorological parameters (mean wind speed, temperature in °C and atmospheric pressure in mbar) acquired between July 2012 and August 2013 (n=1880) using the Furuno Rowind+, mounted at the top of BOREL superstructure (data acquired every 6 hours).\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nWDIR (Wind from direction relative true north, deg T)\nWDIR_QC (Wind from direction relative true north quality flag)\nWSPD (Horizontal wind speed, m/s)\nWSPD_QC (Horizontal wind speed quality flag)\nATMS (Atmospheric pressure at sea level, mBar)\nATMS_QC (Atmospheric pressure at sea level quality flag)\nDRYT (Air temperature in dry bulb, degree_C)\nDRYT_QC (Air temperature in dry bulb quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_Borel_Meteo-Unit-1_2012-2013_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_Borel_Meteo-Unit-1_2012-2013_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_Borel_Meteo-Unit-1_2012-2013/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_Borel_Meteo-Unit-1_2012-2013.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Borel_Meteo-Unit-1_2012-2013&showErrors=false&email= Ifremer IPGP EMSO-AZORES_Borel_Meteo-Unit-1_2012-2013
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2013-2014.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2013-2014 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2013-2014.graph EMSO-Azores, BOREL : Meteorological unit 1 data, 2013-2014 This dataset contains the meteorological parameters (mean wind speed, temperature in °C and atmospheric pressure in mbar) acquired between August 2013 and July 2014 (n=2540) using the Furuno Rowind+, mounted at the top of BOREL superstructure (data acquired every 6 hours).\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nWDIR (Wind from direction relative true north, deg T)\nWDIR_QC (Wind from direction relative true north quality flag)\nWSPD (Horizontal wind speed, m/s)\nWSPD_QC (Horizontal wind speed quality flag)\nATMS (Atmospheric pressure at sea level, mBar)\nATMS_QC (Atmospheric pressure at sea level quality flag)\nDRYT (Air temperature in dry bulb, degree_C)\nDRYT_QC (Air temperature in dry bulb quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_Borel_Meteo-Unit-1_2013-2014_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_Borel_Meteo-Unit-1_2013-2014_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_Borel_Meteo-Unit-1_2013-2014/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_Borel_Meteo-Unit-1_2013-2014.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Borel_Meteo-Unit-1_2013-2014&showErrors=false&email= Ifremer IPGP EMSO-AZORES_Borel_Meteo-Unit-1_2013-2014
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2014-2015.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2014-2015 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2014-2015.graph EMSO-Azores, BOREL : Meteorological unit 1 data, 2014-2015 This dataset contains the meteorological parameters (mean wind speed, temperature in °C and atmospheric pressure in mbar) acquired between July 2014 and April 2015 using the Furuno Rowind+, mounted at the top of BOREL superstructure (data acquired every 6 hours).\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nWDIR (Wind from direction relative true north, deg T)\nWDIR_QC (Wind from direction relative true north quality flag)\nWSPD (Horizontal wind speed, m/s)\nWSPD_QC (Horizontal wind speed quality flag)\nATMS (Atmospheric pressure at sea level, mBar)\nATMS_QC (Atmospheric pressure at sea level quality flag)\nDRYT (Air temperature in dry bulb, degree_C)\nDRYT_QC (Air temperature in dry bulb quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_Borel_Meteo-Unit-1_2014-2015_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_Borel_Meteo-Unit-1_2014-2015_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_Borel_Meteo-Unit-1_2014-2015/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_Borel_Meteo-Unit-1_2014-2015.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Borel_Meteo-Unit-1_2014-2015&showErrors=false&email= Ifremer IPGP EMSO-AZORES_Borel_Meteo-Unit-1_2014-2015
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2015-2016.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2015-2016 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2015-2016.graph EMSO-Azores, BOREL : Meteorological unit 1 data, 2015-2016 This dataset contains the meteorological parameters (mean wind speed, temperature in °C and atmospheric pressure in mbar) acquired between April 2015 and September 2016 using the Furuno Rowind+, mounted at the top of BOREL superstructure (data acquired every 6 hours).\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nWDIR (Wind from direction relative true north, deg T)\nWDIR_QC (Wind from direction relative true north quality flag)\nWSPD (Horizontal wind speed, m/s)\nWSPD_QC (Horizontal wind speed quality flag)\nATMS (Atmospheric pressure at sea level, mBar)\nATMS_QC (Atmospheric pressure at sea level quality flag)\nDRYT (Air temperature in dry bulb, degree_C)\nDRYT_QC (Air temperature in dry bulb quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_Borel_Meteo-Unit-1_2015-2016_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_Borel_Meteo-Unit-1_2015-2016_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_Borel_Meteo-Unit-1_2015-2016/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_Borel_Meteo-Unit-1_2015-2016.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Borel_Meteo-Unit-1_2015-2016&showErrors=false&email= Ifremer IPGP EMSO-AZORES_Borel_Meteo-Unit-1_2015-2016
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2016-2017.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2016-2017 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2016-2017.graph EMSO-Azores, BOREL : Meteorological unit 1 data, 2016-2017 This dataset contains the meteorological parameters (mean wind speed, temperature in °C and atmospheric pressure in mbar) acquired between September 2016 and July 2017 using the Furuno Rowind+, mounted at the top of BOREL superstructure (data acquired every 6 hours).\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nWDIR (Wind from direction relative true north, deg T)\nWDIR_QC (Wind from direction relative true north quality flag)\nWSPD (Horizontal wind speed, m/s)\nWSPD_QC (Horizontal wind speed quality flag)\nATMS (Atmospheric pressure at sea level, mBar)\nATMS_QC (Atmospheric pressure at sea level quality flag)\nDRYT (Air temperature in dry bulb, degree_C)\nDRYT_QC (Air temperature in dry bulb quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_Borel_Meteo-Unit-1_2016-2017_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_Borel_Meteo-Unit-1_2016-2017_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_Borel_Meteo-Unit-1_2016-2017/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_Borel_Meteo-Unit-1_2016-2017.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Borel_Meteo-Unit-1_2016-2017&showErrors=false&email= Ifremer IPGP EMSO-AZORES_Borel_Meteo-Unit-1_2016-2017
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-2_2016-2017.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-2_2016-2017 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-2_2016-2017.graph EMSO-Azores, BOREL : Meteorological unit 2 data, 2016-2017 This dataset contains the meteorological parameters (mean wind speed, temperature in °C and atmospheric pressure in mbar) acquired between September 2016 and July 2017 using the Furuno Rowind+, mounted at the top of BOREL superstructure (data acquired every 6 hours).\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nWDIR (Wind from direction relative true north, deg T)\nWDIR_QC (Wind from direction relative true north quality flag)\nWSPD (Horizontal wind speed, m/s)\nWSPD_QC (Horizontal wind speed quality flag)\nATMS (Atmospheric pressure at sea level, mBar)\nATMS_QC (Atmospheric pressure at sea level quality flag)\nDRYT (Air temperature in dry bulb, degree_C)\nDRYT_QC (Air temperature in dry bulb quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_Borel_Meteo-Unit-2_2016-2017_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_Borel_Meteo-Unit-2_2016-2017_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_Borel_Meteo-Unit-2_2016-2017/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_Borel_Meteo-Unit-2_2016-2017.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Borel_Meteo-Unit-2_2016-2017&showErrors=false&email= Ifremer IPGP EMSO-AZORES_Borel_Meteo-Unit-2_2016-2017
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_EGIM_TEMP-CNDC-PRES_2017-2018.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_EGIM_TEMP-CNDC-PRES_2017-2018 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_EGIM_TEMP-CNDC-PRES_2017-2018.graph EMSO-Azores, EGIM : Conductivity, temperature and pressure, 2017-2018 This dataset contains conductivity, temperature and pressure data acquired between July 2017 and August 2018 on EMSO-Azores observatory by the EGIM. These are 3 of the 7 core parameters monitored by the EGIM, EMSO Generic Instrumental Module.\n\nThe EGIM prototype was deployed at Lucky Strike hydrothermal vent site, 25 m south west of the active edifice Tour Eiffel, to monitor local hydrodynamic variability and complement the data obtained by the numerous sensors set on this site: oceanographic mooring deployed south of the vent field, the multidisciplinary Seamon East node, autonomous current meters, array of temperature probes…\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nPRES (Sea pressure, dbar)\nPRES_QC (Sea pressure quality flag)\nCNDC (Electrical conductivity, S/m)\nCNDC_QC (Electrical conductivity quality flag)\nPSAL (Practical salinity, 0.001)\nPSAL_QC (Practical salinity quality flag)\nSVEL (Sound velocity, m/s)\nSVEL_QC (Sound velocity quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_EGIM_TEMP-CNDC-PRES_2017-2018_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_EGIM_TEMP-CNDC-PRES_2017-2018_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_EGIM_TEMP-CNDC-PRES_2017-2018/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_EGIM_TEMP-CNDC-PRES_2017-2018.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_EGIM_TEMP-CNDC-PRES_2017-2018&showErrors=false&email= Ifremer IPGP EMSO-AZORES_EGIM_TEMP-CNDC-PRES_2017-2018
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_EGIM_Precise-Pressure_2017-2018.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_EGIM_Precise-Pressure_2017-2018 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_EGIM_Precise-Pressure_2017-2018.graph EMSO-Azores, EGIM : High precision pressure, 2017-2018 This dataset contains pressure data acquired between July 2017 and August 2018 on EMSO-Azores observatory by the EGIM. The pressure is one of the 7 core parameters monitored by the EGIM, EMSO Generic Instrumental Module.\n\nThe EGIM prototype was deployed at Lucky Strike hydrothermal vent site, 25 m south west of the active edifice Tour Eiffel, to monitor local hydrodynamic variability and complement the data obtained by the numerous sensors set on this site: oceanographic mooring deployed south of the vent field, the multidisciplinary Seamon East node, autonomous current meters, array of temperature probes.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nPRES (Sea pressure, dbar)\nPRES_QC (Sea pressure quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_EGIM_Precise-Pressure_2017-2018_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_EGIM_Precise-Pressure_2017-2018_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_EGIM_Precise-Pressure_2017-2018/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_EGIM_Precise-Pressure_2017-2018.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_EGIM_Precise-Pressure_2017-2018&showErrors=false&email= Ifremer IPGP EMSO-AZORES_EGIM_Precise-Pressure_2017-2018
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_EGIM_Optode-O2_2017-2018.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_EGIM_Optode-O2_2017-2018 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_EGIM_Optode-O2_2017-2018.graph EMSO-Azores, EGIM : Temperature and dissolved oxygen concentrations, 2017-2018 This dataset contains temperature and dissolved oxygen concentrations and the associated sensor raw data acquired between July 2017 and August 2018 on EMSO-Azores observatory by the EGIM. Dissolved oxygen concentration is one of the 7 core parameters monitored by the EGIM, EMSO Generic Instrumental Module.\n\nThe EGIM prototype was deployed at Lucky Strike hydrothermal vent site, 25 m south west of the active edifice Tour Eiffel, to monitor local hydrodynamic variability and complement the data obtained by the numerous sensors set on this site: oceanographic mooring deployed south of the vent field, the multidisciplinary Seamon East node, autonomous current meters, array of temperature probes…\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nOSAT (Oxygen saturation, percent)\nOSAT_QC (Oxygen saturation quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nDOXY (Dissolved oxygen, umol/l)\nDOXY_QC (Dissolved oxygen quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_EGIM_Optode-O2_2017-2018_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_EGIM_Optode-O2_2017-2018_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_EGIM_Optode-O2_2017-2018/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_EGIM_Optode-O2_2017-2018.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_EGIM_Optode-O2_2017-2018&showErrors=false&email= Ifremer IPGP EMSO-AZORES_EGIM_Optode-O2_2017-2018
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_EGIM_Turbidity_2017-2018.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_EGIM_Turbidity_2017-2018 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_EGIM_Turbidity_2017-2018.graph EMSO-Azores, EGIM : Turbidity, 2017-2018 This dataset contains turbidity and the associated sensor raw data acquired between July 2017 and August 2018 on EMSO-Azores observatory by the EGIM. Tubidity is one of the 7 core parameters monitored by the EGIM, EMSO Generic Instrumental Module.\nThe EGIM prototype was deployed at Lucky Strike hydrothermal vent site, 25 m south west of the active edifice Tour Eiffel, to monitor local hydrodynamic variability and complement the data obtained by the numerous sensors set on this site: oceanographic mooring deployed south of the vent field, the multidisciplinary Seamon East node, autonomous current meters, array of temperature probes…\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTUR4 (Turbidity, NTU)\nTUR4_QC (Turbidity quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_EGIM_Turbidity_2017-2018_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_EGIM_Turbidity_2017-2018_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_EGIM_Turbidity_2017-2018/index.htmlTable ??? https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_EGIM_Turbidity_2017-2018.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_EGIM_Turbidity_2017-2018&showErrors=false&email= IPGP EMSO-AZORES_EGIM_Turbidity_2017-2018
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2011-2012.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2011-2012 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2011-2012.graph EMSO-Azores, SeaMoN East : CHEMINI total dissolved iron concentrations, 2011-2012 This dataset contains dissolved iron concentrations (Fe(II) + Fe(III), µmol/l) acquired between July 2011 and March 2012 (n=1780) using the CHEMINI Fe, a CHEmical MINIaturized analyser (samples taken every 12 hours, without in situ calibration using a 25 µmol/l iron standard, Vuillemin et al., 2009). The sample inlet was positioned on the mussel bed at the base of the Tour Eiffel edifice of the Lucky Strike hydrothermal vent (1695 depth).\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nIRON (Total iron, umol/l)\nIRON_QC (Total iron quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_CHEMINI_Total-Iron_2011-2012_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_CHEMINI_Total-Iron_2011-2012_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_CHEMINI_Total-Iron_2011-2012/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_CHEMINI_Total-Iron_2011-2012.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_CHEMINI_Total-Iron_2011-2012&showErrors=false&email= Ifremer IPGP EMSO-AZORES_CHEMINI_Total-Iron_2011-2012
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2013-2014.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2013-2014 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2013-2014.graph EMSO-Azores, SeaMoN East : CHEMINI total dissolved iron concentrations, 2013-2014 This dataset contains dissolved iron concentrations (Fe(II) + Fe(III), µmol/l) acquired between September 2013 and February 2014 (n=332) using the CHEMINI Fe, a CHEmical MINIaturized analyser (samples taken every 24 hours, with daily in situ calibration using a 25 µmol/l iron standard, Vuillemin et al., 2009). The sample inlet was positioned on the mussel bed at the base of the Tour Eiffel edifice of the Lucky Strike hydrothermal vent (1695 depth).\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nIRON (Total iron, umol/l)\nIRON_QC (Total iron quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_CHEMINI_Total-Iron_2013-2014_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_CHEMINI_Total-Iron_2013-2014_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_CHEMINI_Total-Iron_2013-2014/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_CHEMINI_Total-Iron_2013-2014.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_CHEMINI_Total-Iron_2013-2014&showErrors=false&email= Ifremer IPGP EMSO-AZORES_CHEMINI_Total-Iron_2013-2014
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2014-2015.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2014-2015 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2014-2015.graph EMSO-Azores, SeaMoN East : CHEMINI total dissolved iron concentrations, 2014-2015 This dataset contains dissolved iron concentrations (Fe(II) + Fe(III), µmol/l) acquired between July 2014 and August 2014 (n=332) using the CHEMINI Fe, a CHEmical MINIaturized analyser (samples taken every 24 hours, with daily in situ calibration using a 25 µmol/l iron standard, Vuillemin et al., 2009). The sample inlet was positioned on the mussel bed at the base of the Tour Eiffel edifice of the Lucky Strike hydrothermal vent (1695 depth). CHEMINI Fe (CF1) was mounted on the TEMPO module which was itself connected to the SeaMON East node of the EMSO-Azores observatory.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nIRON (Total iron, umol/l)\nIRON_QC (Total iron quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_CHEMINI_Total-Iron_2014-2015_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_CHEMINI_Total-Iron_2014-2015_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_CHEMINI_Total-Iron_2014-2015/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_CHEMINI_Total-Iron_2014-2015.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_CHEMINI_Total-Iron_2014-2015&showErrors=false&email= Ifremer IPGP EMSO-AZORES_CHEMINI_Total-Iron_2014-2015
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2016-2017.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2016-2017 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2016-2017.graph EMSO-Azores, SeaMoN East : CHEMINI total dissolved iron concentrations, 2016-2017 This dataset contains dissolved iron concentrations (Fe(II) + Fe(III), µmol/l) acquired between September 2016 and February 2017 (n=332) using the CHEMINI Fe, a CHEmical MINIaturized analyser (samples taken every 24 hours, with daily in situ calibration using a 25 µmol/l iron standard, Vuillemin et al., 2009). The sample inlet was positioned on the mussel bed at the base of the Tour Eiffel edifice of the Lucky Strike hydrothermal vent (1695 depth). CHEMINI Fe (CF1) was mounted on the TEMPO module which was itself connected to the SeaMON East node of the EMSO-Azores observatory.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nIRON (Total iron, umol/l)\nIRON_QC (Total iron quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_CHEMINI_Total-Iron_2016-2017_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_CHEMINI_Total-Iron_2016-2017_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_CHEMINI_Total-Iron_2016-2017/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_CHEMINI_Total-Iron_2016-2017.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_CHEMINI_Total-Iron_2016-2017&showErrors=false&email= Ifremer IPGP EMSO-AZORES_CHEMINI_Total-Iron_2016-2017
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2017-2018.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2017-2018 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2017-2018.graph EMSO-Azores, SeaMoN East : CHEMINI total dissolved iron concentrations, 2017-2018 This dataset contains dissolved iron concentrations (Fe(II) + Fe(III), µmol/l) acquired between July 2017 and March 2018 (n=168) using the CHEMINI Fe, a CHEmical MINIaturized analyser (samples taken every 12 hours, with daily in situ calibration using a 20 µmol/l iron standard, Vuillemin et al., 2009). The sample inlet was positioned on the mussel bed at the base of the Tour Eiffel edifice of the Lucky Strike hydrothermal vent (1695 depth). CHEMINI Fe (CF2) was mounted on the TEMPO module which was itself connected to the SeaMON East node of the EMSO-Azores observatory.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nIRON (Total iron, umol/l)\nIRON_QC (Total iron quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_CHEMINI_Total-Iron_2017-2018_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_CHEMINI_Total-Iron_2017-2018_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_CHEMINI_Total-Iron_2017-2018/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_CHEMINI_Total-Iron_2017-2018.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_CHEMINI_Total-Iron_2017-2018&showErrors=false&email= Ifremer IPGP EMSO-AZORES_CHEMINI_Total-Iron_2017-2018
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2018-2019.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2018-2019 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2018-2019.graph EMSO-Azores, SeaMoN East : CHEMINI total dissolved iron concentrations, 2018-2019 This dataset contains dissolved iron concentrations (Fe(II) + Fe(III), µmol/l) acquired between August 2018 and December 2018 (n=445) using the CHEMINI Fe, a CHEmical MINIaturized analyser (samples taken every 12 hours, with daily in situ calibration using a 20 µmol/l iron standard, Vuillemin et al., 2009). The sample inlet was positioned on the mussel bed at the base of the Tour Eiffel edifice of the Lucky Strike hydrothermal vent (1695 depth). CHEMINI Fe (CF2) was mounted on the TEMPO module which was itself connected to the SeaMON East node of the EMSO-Azores observatory.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nIRON (Total iron, umol/l)\nIRON_QC (Total iron quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_CHEMINI_Total-Iron_2018-2019_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_CHEMINI_Total-Iron_2018-2019_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_CHEMINI_Total-Iron_2018-2019/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_CHEMINI_Total-Iron_2018-2019.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_CHEMINI_Total-Iron_2018-2019&showErrors=false&email= Ifremer IPGP EMSO-AZORES_CHEMINI_Total-Iron_2018-2019
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2019-2020.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2019-2020 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2019-2020.graph EMSO-Azores, SeaMoN East : CHEMINI total dissolved iron concentrations, 2019-2020 This dataset contains dissolved iron concentrations (Fe(II) + Fe(III), µmol/l) acquired between July 2019 and Septembre 2020 (n=1620) using the CHEMINI Fe, a CHEmical MINIaturized analyser (samples taken every 24 hours, with weekly in situ calibration using a 25 µmol/l iron standard, Vuillemin et al., 2009). The sample inlet was positioned on the mussel bed at the base of the Tour Eiffel edifice of the Lucky Strike hydrothermal vent (1695 depth). CHEMINI Fe (CF2) was mounted on the TEMPO module which was itself connected to the SeaMON East node of the EMSO-Azores observatory.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nIRON (Total iron, umol/l)\nIRON_QC (Total iron quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_CHEMINI_Total-Iron_2019-2020_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_CHEMINI_Total-Iron_2019-2020_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_CHEMINI_Total-Iron_2019-2020/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_CHEMINI_Total-Iron_2019-2020.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_CHEMINI_Total-Iron_2019-2020&showErrors=false&email= Ifremer IPGP EMSO-AZORES_CHEMINI_Total-Iron_2019-2020
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2013-2014.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2013-2014 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2013-2014.graph EMSO-Azores, SeaMoN East : Temperature (°C) and dissolved oxygen concentrations (µmol/l) data, 2013-2014 This dataset contains temperature (°C) and dissolved oxygen concentrations (µmol/l) acquired between August 2013 and July 2014 using an Aanderaa optode (model 3830, sensor head # 1180-520, salinity setting 3.5%, uncorrected for pressure) The sensor. The sensor was positioned on a mussel bed at the base of the Tour Eiffel edifice (1695m depth). Data was acquired every 15 minutes. A two-point calibration at 0% and 100% saturation levels is performed at each maintenance cruise. The optode connected to the TEMPO ecological module is part of the SeaMoN East monitoring node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nOSAT (Oxygen saturation, percent)\nOSAT_QC (Oxygen saturation quality flag)\nDOXY (Dissolved oxygen, umol/l)\nDOXY_QC (Dissolved oxygen quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_Seamon-East_Optode-O2_2013-2014_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_Seamon-East_Optode-O2_2013-2014_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_Seamon-East_Optode-O2_2013-2014/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_Seamon-East_Optode-O2_2013-2014.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Seamon-East_Optode-O2_2013-2014&showErrors=false&email= Ifremer IPGP EMSO-AZORES_Seamon-East_Optode-O2_2013-2014
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2015-2016.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2015-2016 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2015-2016.graph EMSO-Azores, SeaMoN East : Temperature (°C) and dissolved oxygen concentrations (µmol/l) data, 2015-2016 This dataset contains temperature (°C) and dissolved oxygen concentrations (µmol/l) acquired between April 2015 and September 2016 using an Aanderaa optode (model 3830, sensor head # 1180-520, salinity setting 3.5%, uncorrected for pressure) The sensor. The sensor was positioned on a mussel bed at the base of the Tour Eiffel edifice (1695m depth). Data was acquired every 15 minutes. A two-point calibration at 0% and 100% saturation levels is performed at each maintenance cruise. The optode connected to the TEMPO ecological module is part of the SeaMoN East monitoring node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nOSAT (Oxygen saturation, percent)\nOSAT_QC (Oxygen saturation quality flag)\nDOXY (Dissolved oxygen, umol/l)\nDOXY_QC (Dissolved oxygen quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_Seamon-East_Optode-O2_2015-2016_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_Seamon-East_Optode-O2_2015-2016_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_Seamon-East_Optode-O2_2015-2016/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_Seamon-East_Optode-O2_2015-2016.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Seamon-East_Optode-O2_2015-2016&showErrors=false&email= Ifremer IPGP EMSO-AZORES_Seamon-East_Optode-O2_2015-2016
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2016-2017.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2016-2017 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2016-2017.graph EMSO-Azores, SeaMoN East : Temperature (°C) and dissolved oxygen concentrations (µmol/l) data, 2016-2017 (Tempo) This dataset contains temperature (°C) and dissolved oxygen concentrations (µmol/l) (and the associated sensor raw data) acquired between September 2016 and February 2017 using an Aanderaa optode (model 4330, sensor head #2133, salinity setting 3.5%, uncorrected for pressure) The sensor. The sensor was positioned on a mussel bed at the base of the Tour Eiffel edifice (1695m depth). Data was acquired every 15 minutes. A two-point calibration at 0% and 100% saturation levels is performed at each maintenance cruise. The optode connected to the TEMPO ecological module is part of the SeaMoN East monitoring node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nOSAT (Oxygen saturation, percent)\nOSAT_QC (Oxygen saturation quality flag)\nDOXY (Dissolved oxygen, umol/l)\nDOXY_QC (Dissolved oxygen quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_Seamon-East_Optode-O2_2016-2017_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_Seamon-East_Optode-O2_2016-2017_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_Seamon-East_Optode-O2_2016-2017/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_Seamon-East_Optode-O2_2016-2017.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Seamon-East_Optode-O2_2016-2017&showErrors=false&email= Ifremer IPGP EMSO-AZORES_Seamon-East_Optode-O2_2016-2017
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2012-2013.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2012-2013 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2012-2013.graph EMSO-Azores, SeaMoN East : Temperature (°C) and dissolved oxygen concentrations, 2012-2013 This dataset contains temperature (°C) and dissolved oxygen concentrations (µmol/l) acquired between July 2012 and August 2013 using an Aanderaa optode (model 3830, sensor head # 1180-520, salinity setting 3.5%, uncorrected for pressure). The sensor was positioned on a mussel bed at the base of the Tour Eiffel edifice (1695m depth). Data was acquired every 15 minutes. A two-point calibration at 0% and 100% saturation levels is performed at each maintenance cruise. The optode connected to the TEMPO ecological module is part of the SeaMoN East monitoring node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nOSAT (Oxygen saturation, percent)\nOSAT_QC (Oxygen saturation quality flag)\nDOXY (Dissolved oxygen, umol/l)\nDOXY_QC (Dissolved oxygen quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_Seamon-East_Optode-O2_2012-2013_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_Seamon-East_Optode-O2_2012-2013_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_Seamon-East_Optode-O2_2012-2013/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_Seamon-East_Optode-O2_2012-2013.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Seamon-East_Optode-O2_2012-2013&showErrors=false&email= Ifremer IPGP EMSO-AZORES_Seamon-East_Optode-O2_2012-2013
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2011-2012.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2011-2012 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2011-2012.graph EMSO-Azores, SeaMoN East : Turbidity (NTU) data, 2011-2012 This dataset contains turbidity (Nephelometric Turbidity Units (NTU)) data acquired between July 2011 and July 2012 using a Wetlabs turbidimeter (ECO-BBRTD, serial # 215R) installed horizontally at 1.5 m height at the top of the SeaMoN East frame. The sensor was not calibrated as the sizes of the natural particles are unknown. Data was acquired every 15 minutes. The instrument is part of the SeaMoN East ecological monitoring node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTUR4 (Turbidity, NTU)\nTUR4_QC (Turbidity quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_Wetlabs_Turbidity_2011-2012_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_Wetlabs_Turbidity_2011-2012_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_Wetlabs_Turbidity_2011-2012/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_Wetlabs_Turbidity_2011-2012.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Wetlabs_Turbidity_2011-2012&showErrors=false&email= Ifremer IPGP EMSO-AZORES_Wetlabs_Turbidity_2011-2012
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2012-2013.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2012-2013 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2012-2013.graph EMSO-Azores, SeaMoN East : Turbidity (NTU) data, 2012-2013 This dataset contains turbidity (Nephelometric Turbidity Units (NTU)) data acquired between July 2012 and August 2013 using a Wetlabs turbidimeter (ECO-BBRTD, serial # 215R) installed horizontally at 1.5 m height at the top of the SeaMoN East frame. The sensor was not calibrated as the sizes of the natural particles are unknown. Data was acquired every 15 minutes. The instrument is part of the SeaMoN East ecological monitoring node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTUR4 (Turbidity, NTU)\nTUR4_QC (Turbidity quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_Wetlabs_Turbidity_2012-2013_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_Wetlabs_Turbidity_2012-2013_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_Wetlabs_Turbidity_2012-2013/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_Wetlabs_Turbidity_2012-2013.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Wetlabs_Turbidity_2012-2013&showErrors=false&email= Ifremer IPGP EMSO-AZORES_Wetlabs_Turbidity_2012-2013
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2013-2014.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2013-2014 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2013-2014.graph EMSO-Azores, SeaMoN East : Turbidity (NTU) data, 2013-2014 This dataset contains turbidity (Nephelometric Turbidity Units (NTU)) data acquired between August 2013 and July 2014 using a Wetlabs turbidimeter (ECO-BBRTD, serial # 215R) installed horizontally at 1.5 m height at the top of the SeaMoN East frame. The sensor was not calibrated as the sizes of the natural particles are unknown. Data was acquired every 15 minutes. The instrument is part of the SeaMoN East ecological monitoring node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTUR4 (Turbidity, NTU)\nTUR4_QC (Turbidity quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_Wetlabs_Turbidity_2013-2014_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_Wetlabs_Turbidity_2013-2014_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_Wetlabs_Turbidity_2013-2014/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_Wetlabs_Turbidity_2013-2014.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Wetlabs_Turbidity_2013-2014&showErrors=false&email= Ifremer IPGP EMSO-AZORES_Wetlabs_Turbidity_2013-2014
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2015-2016.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2015-2016 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2015-2016.graph EMSO-Azores, SeaMoN East : Turbidity (NTU) data, 2015-2016 This dataset contains turbidity (Nephelometric Turbidity Units (NTU)) data acquired between April 2015 and September 2016 using a Wetlabs turbidimeter (ECO-BBRTD, serial # 215R) installed horizontally at 1.5 m height at the top of the SeaMoN East frame. The sensor was not calibrated as the sizes of the natural particles are unknown. Data was acquired every 15 minutes. The instrument is part of the SeaMoN East ecological monitoring node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTUR4 (Turbidity, NTU)\nTUR4_QC (Turbidity quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_Wetlabs_Turbidity_2015-2016_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_Wetlabs_Turbidity_2015-2016_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_Wetlabs_Turbidity_2015-2016/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_Wetlabs_Turbidity_2015-2016.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Wetlabs_Turbidity_2015-2016&showErrors=false&email= Ifremer IPGP EMSO-AZORES_Wetlabs_Turbidity_2015-2016
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2016-2017.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2016-2017 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2016-2017.graph EMSO-Azores, SeaMoN East : Turbidity (NTU) data, 2016-2017 This dataset contains turbidity (Nephelometric Turbidity Units (NTU)) data acquired between September 2016 and February 2017 using a Wetlabs turbidimeter (ECO-BBRTD, serial # 215R) installed horizontally at 1.5 m height at the top of the SeaMoN East frame. The sensor was not calibrated as the sizes of the natural particles are unknown. Data was acquired every 15 minutes. The instrument is part of the SeaMoN East ecological monitoring node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTUR4 (Turbidity, NTU)\nTUR4_QC (Turbidity quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_Wetlabs_Turbidity_2016-2017_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_Wetlabs_Turbidity_2016-2017_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_Wetlabs_Turbidity_2016-2017/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_Wetlabs_Turbidity_2016-2017.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Wetlabs_Turbidity_2016-2017&showErrors=false&email= Ifremer IPGP EMSO-AZORES_Wetlabs_Turbidity_2016-2017
https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2017-2018.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2017-2018 https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2017-2018.graph EMSO-Azores, SeaMoN East : Turbidity (NTU) data, 2017-2018 This dataset contains turbidity (Nephelometric Turbidity Units (NTU)) data acquired between July 2017 and July 2018 using a Wetlabs turbidimeter (ECO-BBRTD, serial # 215R) installed horizontally at 1.5 m height at the top of the SeaMoN East frame. The sensor was not calibrated as the sizes of the natural particles are unknown. Data was acquired every 15 minutes. The instrument is part of the SeaMoN East ecological monitoring node deployed at ca 10m away from the active hydrothermal edifice Tour Eiffel.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTUR4 (Turbidity, NTU)\nTUR4_QC (Turbidity quality flag)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_Wetlabs_Turbidity_2017-2018_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_Wetlabs_Turbidity_2017-2018_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_Wetlabs_Turbidity_2017-2018/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_Wetlabs_Turbidity_2017-2018.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Wetlabs_Turbidity_2017-2018&showErrors=false&email= Ifremer IPGP EMSO-AZORES_Wetlabs_Turbidity_2017-2018
https://erddap.emso-fr.org/erddap/tabledap/EMSO-LIGURE-NICE_SPF-PZ3L-01_2015-2019.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-LIGURE-NICE_SPF-PZ3L-01_2015-2019 https://erddap.emso-fr.org/erddap/tabledap/EMSO-LIGURE-NICE_SPF-PZ3L-01_2015-2019.graph EMSO-LIGURE NICE, Pore pressure and temperature data from piezometer SPF-PZ3L-01, 2015-2019 This dataset contains the pressure and temperature data acquired by piezometer SPF-PZ3L from October 2015 following its deployment during the ESS_PENF50_2015 cruise. It operated in an autonomous mode until its connection to the EMSO-Ligure Nice cabled observatory on the 14/09/2016. Sediment pore pressure together with temperature have been measured at 20 different levels below seafloor.\n\ncdm_data_type = TimeSeries\nVARIABLES:\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ntime (seconds since 1970-01-01T00:00:00Z)\ndepth (Depth below sea floor, m)\nSE_DEPH_QC (quality flag quality flag)\nTIME_QC (quality flag quality flag)\nSE_TEMP (Solid earth temperature, degree_C)\nSE_PRES (Solid earth differential pore pressure, dbar)\nSE_TEMP_QC (quality flag quality flag)\nSE_PRES_QC (quality flag quality flag)\nLEVEL (1)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-LIGURE-NICE_SPF-PZ3L-01_2015-2019_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-LIGURE-NICE_SPF-PZ3L-01_2015-2019_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-LIGURE-NICE_SPF-PZ3L-01_2015-2019/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-LIGURE-NICE_SPF-PZ3L-01_2015-2019.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-LIGURE-NICE_SPF-PZ3L-01_2015-2019&showErrors=false&email= Ifremer EMSO-LIGURE-NICE_SPF-PZ3L-01_2015-2019
https://erddap.emso-fr.org/erddap/tabledap/EMSO-LIGURE-NICE_ST4-PZ2L-01B_2014-2019.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-LIGURE-NICE_ST4-PZ2L-01B_2014-2019 https://erddap.emso-fr.org/erddap/tabledap/EMSO-LIGURE-NICE_ST4-PZ2L-01B_2014-2019.graph EMSO-LIGURE NICE, Pore pressure and temperature data from piezometer ST4-PZ2L-01B, 2014-2019 This dataset contains the pressure and temperature data acquired below seafloor by piezometer ST4-PZ2L-01B since 2016 following its deployment during the STEP 2014 cruise. It operated in an autonomous mode until its connection to the EMSO-Ligure Nice cabled observatory on the 14/09/2016. Sediment pore pressure together with temperature have been measured at 6 different levels below seafloor.\n\ncdm_data_type = TimeSeries\nVARIABLES:\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ntime (seconds since 1970-01-01T00:00:00Z)\ndepth (Depth below sea floor, m)\nSE_DEPH_QC (quality flag quality flag)\nTIME_QC (quality flag quality flag)\nSE_TEMP (Solid earth temperature, degree_C)\nSE_PRES (Solid earth differential pore pressure, dbar)\nSE_TEMP_QC (quality flag quality flag)\nSE_PRES_QC (quality flag quality flag)\nLEVEL (1)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-LIGURE-NICE_ST4-PZ2L-01B_2014-2019_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-LIGURE-NICE_ST4-PZ2L-01B_2014-2019_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-LIGURE-NICE_ST4-PZ2L-01B_2014-2019/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-LIGURE-NICE_ST4-PZ2L-01B_2014-2019.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-LIGURE-NICE_ST4-PZ2L-01B_2014-2019&showErrors=false&email= Ifremer EMSO-LIGURE-NICE_ST4-PZ2L-01B_2014-2019
https://erddap.emso-fr.org/erddap/tabledap/EMSO-LIGURE-NICE_ST4-PZ2L-03_2014-2018.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-LIGURE-NICE_ST4-PZ2L-03_2014-2018 https://erddap.emso-fr.org/erddap/tabledap/EMSO-LIGURE-NICE_ST4-PZ2L-03_2014-2018.graph EMSO-LIGURE NICE, Pore pressure and temperature data from piezometer ST4-PZ2L-03, 2014-2018 This dataset contains the pressure and temperature data acquired below seafloor by piezometer ST4-PZ2L-03 since January 2014 following its deployment during the STEP 2014 cruise. It operated in an autonomous mode until its connection to the EMSO-Ligure Nice cabled observatory on the 13/09/2017. Sediment pore pressure together with temperature have been measured at 7 different levels below seafloor.\n\ncdm_data_type = TimeSeries\nVARIABLES:\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ntime (seconds since 1970-01-01T00:00:00Z)\ndepth (Depth below sea floor, m)\nSE_DEPH_QC (quality flag quality flag)\nTIME_QC (quality flag quality flag)\nSE_TEMP (Solid earth temperature, degree_C)\nSE_PRES (Solid earth differential pore pressure, dbar)\nSE_TEMP_QC (quality flag quality flag)\nSE_PRES_QC (quality flag quality flag)\nLEVEL (1)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-LIGURE-NICE_ST4-PZ2L-03_2014-2018_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-LIGURE-NICE_ST4-PZ2L-03_2014-2018_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-LIGURE-NICE_ST4-PZ2L-03_2014-2018/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-LIGURE-NICE_ST4-PZ2L-03_2014-2018.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-LIGURE-NICE_ST4-PZ2L-03_2014-2018&showErrors=false&email= Ifremer EMSO-LIGURE-NICE_ST4-PZ2L-03_2014-2018
https://erddap.emso-fr.org/erddap/tabledap/EMSO-LIGURE-NICE_MAR2-PZML-01_2021-2022.subset https://erddap.emso-fr.org/erddap/tabledap/EMSO-LIGURE-NICE_MAR2-PZML-01_2021-2022 https://erddap.emso-fr.org/erddap/tabledap/EMSO-LIGURE-NICE_MAR2-PZML-01_2021-2022.graph EMSO-LIGURE NICE, Pressure and temperature data from piezometer MAR2-PZML-01 since July 2021 This dataset contains the pressure and temperature data acquired below seafloor by piezometer MAR2-PZML-01 since July 2021 following its deployment during the MaRoLiS cruise and its connection to the EMSO-Ligure Nice cabled observatory. Pressure has been measured together with temperature at 7 different levels below seafloor. The P1 and P7 absolute pressure sensors have recorded the ambient pressure of the water column through the seawater-filled interior of the piezometer shaft. The P2 to P6 differential pressure sensors have recorded fluid pressure in the sediment pores relative to the water column pressure.\n\ncdm_data_type = TimeSeries\nVARIABLES:\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ntime (seconds since 1970-01-01T00:00:00Z)\ndepth (Depth below sea floor, m)\nSE_DEPH_QC (quality flag quality flag)\nTIME_QC (quality flag quality flag)\nSE_TEMP (Solid earth temperature, degree_C)\nSE_PRES (Solid earth differential pore pressure, dbar)\nSE_TEMP_QC (quality flag quality flag)\nSE_PRES_QC (quality flag quality flag)\nLEVEL (1)\n https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-LIGURE-NICE_MAR2-PZML-01_2021-2022_fgdc.xml https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-LIGURE-NICE_MAR2-PZML-01_2021-2022_iso19115.xml https://erddap.emso-fr.org/erddap/info/EMSO-LIGURE-NICE_MAR2-PZML-01_2021-2022/index.htmlTable https://wwz.ifremer.fr/ (external link) https://erddap.emso-fr.org/erddap/rss/EMSO-LIGURE-NICE_MAR2-PZML-01_2021-2022.rss https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-LIGURE-NICE_MAR2-PZML-01_2021-2022&showErrors=false&email= Ifremer EMSO-LIGURE-NICE_MAR2-PZML-01_2021-2022

 
ERDDAP, Version 2.14
Disclaimers | Privacy Policy | Contact