Easier access to scientific data
|
ERDDAP
Easier access to scientific data |
| griddap | Subset | tabledap | Make A Graph | wms | files | Title | Summary | FGDC | ISO 19115 | Info | Background Info | RSS | Institution | Dataset ID | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| https://erddap.emso-fr.org/erddap/tabledap/EMSO_Marmara_RCM_Maregami2.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO_Marmara_RCM_Maregami2 | https://erddap.emso-fr.org/erddap/tabledap/EMSO_Marmara_RCM_Maregami2.graph | EMSO / MAREGAMI Marmara BPR2 station Lat:40.7934 Long:29.0312 Depth:1225m, Seaguard RCM data | Seaguard RCM: Time series acquired with Seaguard RCM #155, sensors: DCS #146, Conductivity #788, Tide (P,T) #393\n\ncdm_data_type = Point\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nnorthward_seawater_velocity (m.s-1)\neastward_seawater_velocity (m.s-1)\nInstrument_heading_Deg (degree)\nTilt_X_Deg (degree)\nTilt_Y_Deg (degree)\nSingle_ping_Std_cm_s_1 (cm.s-1)\nSignal_Strength_dB (dB)\nsea_water_electrical_conductivity (S.m-1)\nsea_water_temperature (degree_C)\nsea_water_pressure (dbar)\nlatitude (degrees_north)\nlongitude (degrees_east)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO_Marmara_RCM_Maregami2_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO_Marmara_RCM_Maregami2_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO_Marmara_RCM_Maregami2/index.htmlTable | http://www.emso-fr.org/EMSO-France
| https://erddap.emso-fr.org/erddap/rss/EMSO_Marmara_RCM_Maregami2.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO_Marmara_RCM_Maregami2&showErrors=false&email= | CEREGE UMR 7330 CNRS | EMSO_Marmara_RCM_Maregami2 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO_Marmara_RCM_Maregami3.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO_Marmara_RCM_Maregami3 | https://erddap.emso-fr.org/erddap/tabledap/EMSO_Marmara_RCM_Maregami3.graph | EMSO / MAREGAMI Marmara BPR3 station Lat:40.8568, Long:28.1523, Depth:1184m Seaguard RCM data | Seaguard RCM: Time series acquired with Seaguard RCM #155, sensors: DCS #146, Conductivity #788, Tide (P,T) #393\n\ncdm_data_type = Point\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nnorthward_seawater_velocity (m.s-1)\neastward_seawater_velocity (m.s-1)\nInstrument_heading_Deg (degree)\nTilt_X_Deg (degree)\nTilt_Y_Deg (degree)\nStd_Tilt_Deg (degree)\nSingle_ping_Std_cm_s_1 (cm.s-1)\nSignal_Strength_dB (Signal Strength D B, dB)\nsea_water_temperature (degree_C)\nsea_water_pressure (dbar)\nmole_concentration_of_dissolved_molecular_oxygen_in_sea_water (mol.m-3)\nlatitude (degrees_north)\nlongitude (degrees_east)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO_Marmara_RCM_Maregami3_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO_Marmara_RCM_Maregami3_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO_Marmara_RCM_Maregami3/index.htmlTable | http://www.emso-fr.org/EMSO-France
| https://erddap.emso-fr.org/erddap/rss/EMSO_Marmara_RCM_Maregami3.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO_Marmara_RCM_Maregami3&showErrors=false&email= | CEREGE UMR 7330 CNRS | EMSO_Marmara_RCM_Maregami3 | |||
| https://erddap.emso-fr.org/erddap/tabledap/GL_TS_MO_EMSO-Azores-Borel_history | https://erddap.emso-fr.org/erddap/tabledap/GL_TS_MO_EMSO-Azores-Borel_history.graph | EMSO Azores Borel near real time data (history) | Global Ocean - In Situ Observation Copernicus\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\nTIME_QC (Time quality flag)\nDC_REFERENCE (Station/Location unique identifier in data centre)\ndepth (m)\nDEPH_QC (Depth quality flag)\nPRES (Sea pressure, dbar)\nPRES_QC (Sea pressure quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nPSAL (Practical salinity, 0.001)\nPSAL_QC (Practical salinity quality flag)\nCNDC (Electrical conductivity, S m-1)\nCNDC_QC (Electrical conductivity quality flag)\nDOX1 (Dissolved oxygen, ml l-1)\nDOX1_QC (Dissolved oxygen quality flag)\nALTS (Altitude, meter)\nALTS_QC (Altitude quality flag)\nATMS (Atmospheric pressure at sea level, hPa)\nATMS_QC (Atmospheric pressure at sea level quality flag)\nDEWT (Dew point temperature, degree_C)\nDEWT_QC (Dew point temperature quality flag)\nDRYT (Air temperature in dry bulb, degree_C)\nDRYT_QC (Air temperature in dry bulb quality flag)\nGDIR (Gust wind from direction relative true north, degree)\nGDIR_QC (Gust wind from direction relative true north quality flag)\n... (10 more variables)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/GL_TS_MO_EMSO-Azores-Borel_history_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/GL_TS_MO_EMSO-Azores-Borel_history_iso19115.xml | https://erddap.emso-fr.org/erddap/info/GL_TS_MO_EMSO-Azores-Borel_history/index.htmlTable | http://marine.copernicus.eu
| https://erddap.emso-fr.org/erddap/rss/GL_TS_MO_EMSO-Azores-Borel_history.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=GL_TS_MO_EMSO-Azores-Borel_history&showErrors=false&email= | IFREMER Institut Français de Recherche pour l'Exploitation de la Mer | GL_TS_MO_EMSO-Azores-Borel_history | ||||
| https://erddap.emso-fr.org/erddap/tabledap/Emso_Azores_Chemini_IRON.subset | https://erddap.emso-fr.org/erddap/tabledap/Emso_Azores_Chemini_IRON | https://erddap.emso-fr.org/erddap/tabledap/Emso_Azores_Chemini_IRON.graph | EMSO Azores Seamon-East Chemini dissolved iron concentration | This dataset contains dissolved iron concentrations ((Fe(II) + Fe(III); µmol/l) acquired between September 2013 and July 2017 using the CHEMINI Fe, a CHEmical MINIaturized analyser (samples taken every 12 hours, with daily in situ calibration using a 20 µmol/l iron standard, Vuillemin et al., 2009). The sample inlet was positioned on the mussel bed at the base of the Tour Eiffel edifice of the Lucky Strike hydrothermal vent (1695 depth).CHEMINI Fe (CF2) was mounted on the TEMPO module which was itself connected to the SeaMON East node of the EMSO-Azores observatory. Measured properties: temperature and Total dissolved iron concentration\n\ncdm_data_type = TimeSeries\nVARIABLES:\nplatform_code\nplatform_name\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_Celsius)\nTEMP_QC (Sea temperature quality flag)\nIRON (Total iron, millimole/m3)\nIRON_QC (Total iron quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/Emso_Azores_Chemini_IRON_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/Emso_Azores_Chemini_IRON_iso19115.xml | https://erddap.emso-fr.org/erddap/info/Emso_Azores_Chemini_IRON/index.htmlTable | http://www.oceansites.org
| https://erddap.emso-fr.org/erddap/rss/Emso_Azores_Chemini_IRON.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=Emso_Azores_Chemini_IRON&showErrors=false&email= | Ifremer Institut Francais de Recherche pour l'Exploitation de la Mer | Emso_Azores_Chemini_IRON | |||
| https://erddap.emso-fr.org/erddap/tabledap/GL_TS_MO_EMSO-Azores-SeamonEast_history.subset | https://erddap.emso-fr.org/erddap/tabledap/GL_TS_MO_EMSO-Azores-SeamonEast_history | https://erddap.emso-fr.org/erddap/tabledap/GL_TS_MO_EMSO-Azores-SeamonEast_history.graph | EMSO Azores Seamon-East near real time data (history) | Global Ocean - In Situ Observation Copernicus\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\nTIME_QC (Time quality flag)\nDC_REFERENCE (Station/Location unique identifier in data centre)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nTEMP_DOXY (Sea temperature from oxygen sensor, degree_Celsius)\nTEMP_DOXY_QC (Sea temperature from oxygen sensor quality flag)\nDOXY (Dissolved oxygen, MMol' 'M-3)\nDOXY_QC (Dissolved oxygen quality flag)\nIRON (Total iron, millimole/m3)\nIRON_QC (Total iron quality flag)\nOSAT (Oxygen saturation, percent)\nOSAT_QC (Oxygen saturation quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/GL_TS_MO_EMSO-Azores-SeamonEast_history_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/GL_TS_MO_EMSO-Azores-SeamonEast_history_iso19115.xml | https://erddap.emso-fr.org/erddap/info/GL_TS_MO_EMSO-Azores-SeamonEast_history/index.htmlTable | http://marine.copernicus.eu
| https://erddap.emso-fr.org/erddap/rss/GL_TS_MO_EMSO-Azores-SeamonEast_history.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=GL_TS_MO_EMSO-Azores-SeamonEast_history&showErrors=false&email= | IFREMER Institut Français de Recherche pour l'Exploitation de la Mer | GL_TS_MO_EMSO-Azores-SeamonEast_history | |||
| https://erddap.emso-fr.org/erddap/tabledap/GL_TS_MO_EMSO-Azores-SeamonWest_history.subset | https://erddap.emso-fr.org/erddap/tabledap/GL_TS_MO_EMSO-Azores-SeamonWest_history | https://erddap.emso-fr.org/erddap/tabledap/GL_TS_MO_EMSO-Azores-SeamonWest_history.graph | EMSO Azores Seamon-West near real time data (history) | Global Ocean - In Situ Observation Copernicus\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\nTIME_QC (Time quality flag)\nDC_REFERENCE (Station/Location unique identifier in data centre)\ndepth (m)\nDEPH_QC (Depth quality flag)\nPRES (Sea pressure, dbar)\nPRES_QC (Sea pressure quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nTEMP_DOXY (Sea temperature from oxygen sensor, degree_Celsius)\nTEMP_DOXY_QC (Sea temperature from oxygen sensor quality flag)\nPSAL (Practical salinity, 0.001)\nPSAL_QC (Practical salinity quality flag)\nCNDC (Electrical conductivity, S m-1)\nCNDC_QC (Electrical conductivity quality flag)\nDOXY (Dissolved oxygen, MMol' 'M-3)\nDOXY_QC (Dissolved oxygen quality flag)\nOSAT (Oxygen saturation, percent)\nOSAT_QC (Oxygen saturation quality flag)\nSVEL (Sound velocity, m s-1)\nSVEL_QC (Sound velocity quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/GL_TS_MO_EMSO-Azores-SeamonWest_history_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/GL_TS_MO_EMSO-Azores-SeamonWest_history_iso19115.xml | https://erddap.emso-fr.org/erddap/info/GL_TS_MO_EMSO-Azores-SeamonWest_history/index.htmlTable | http://marine.copernicus.eu
| https://erddap.emso-fr.org/erddap/rss/GL_TS_MO_EMSO-Azores-SeamonWest_history.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=GL_TS_MO_EMSO-Azores-SeamonWest_history&showErrors=false&email= | IFREMER Institut Français de Recherche pour l'Exploitation de la Mer | GL_TS_MO_EMSO-Azores-SeamonWest_history | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2016-2017.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2016-2017 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2016-2017.graph | EMSO Azores TCM3-1 Ocean Bottom Tilt Current Meter : 2016-2017 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-1_2016-2017_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-1_2016-2017_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-1_2016-2017/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-1_2016-2017.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-1_2016-2017&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-1_2016-2017 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2017-2018.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2017-2018 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2017-2018.graph | EMSO Azores TCM3-1 Ocean Bottom Tilt Current Meter : 2017-2018 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-1_2017-2018_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-1_2017-2018_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-1_2017-2018/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-1_2017-2018.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-1_2017-2018&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-1_2017-2018 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2018-2019.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2018-2019 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2018-2019.graph | EMSO Azores TCM3-1 Ocean Bottom Tilt Current Meter : 2018-2019 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-1_2018-2019_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-1_2018-2019_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-1_2018-2019/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-1_2018-2019.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-1_2018-2019&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-1_2018-2019 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2021-2022.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2021-2022 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-1_2021-2022.graph | EMSO Azores TCM3-1 Ocean Bottom Tilt Current Meter : 2021-2022 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-1_2021-2022_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-1_2021-2022_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-1_2021-2022/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-1_2021-2022.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-1_2021-2022&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-1_2021-2022 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2017-2018.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2017-2018 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2017-2018.graph | EMSO Azores TCM3-2 Ocean Bottom Tilt Current Meter : 2017-2018 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-2_2017-2018_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-2_2017-2018_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-2_2017-2018/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-2_2017-2018.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-2_2017-2018&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-2_2017-2018 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2018-2019.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2018-2019 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2018-2019.graph | EMSO Azores TCM3-2 Ocean Bottom Tilt Current Meter : 2018-2019 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-2_2018-2019_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-2_2018-2019_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-2_2018-2019/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-2_2018-2019.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-2_2018-2019&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-2_2018-2019 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2019-2020.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2019-2020 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2019-2020.graph | EMSO Azores TCM3-2 Ocean Bottom Tilt Current Meter : 2019-2020 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-2_2019-2020_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-2_2019-2020_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-2_2019-2020/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-2_2019-2020.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-2_2019-2020&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-2_2019-2020 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2020-2021.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2020-2021 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-2_2020-2021.graph | EMSO Azores TCM3-2 Ocean Bottom Tilt Current Meter : 2020-2021 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-2_2020-2021_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-2_2020-2021_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-2_2020-2021/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-2_2020-2021.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-2_2020-2021&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-2_2020-2021 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2016-2017.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2016-2017 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2016-2017.graph | EMSO Azores TCM3-3 Ocean Bottom Tilt Current Meter : 2016-2017 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-3_2016-2017_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-3_2016-2017_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-3_2016-2017/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-3_2016-2017.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-3_2016-2017&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-3_2016-2017 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2017-2018.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2017-2018 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2017-2018.graph | EMSO Azores TCM3-3 Ocean Bottom Tilt Current Meter : 2017-2018 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-3_2017-2018_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-3_2017-2018_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-3_2017-2018/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-3_2017-2018.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-3_2017-2018&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-3_2017-2018 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2018-2019.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2018-2019 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2018-2019.graph | EMSO Azores TCM3-3 Ocean Bottom Tilt Current Meter : 2018-2019 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-3_2018-2019_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-3_2018-2019_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-3_2018-2019/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-3_2018-2019.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-3_2018-2019&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-3_2018-2019 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2019-2020.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2019-2020 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2019-2020.graph | EMSO Azores TCM3-3 Ocean Bottom Tilt Current Meter : 2019-2020 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-3_2019-2020_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-3_2019-2020_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-3_2019-2020/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-3_2019-2020.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-3_2019-2020&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-3_2019-2020 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2020-2021.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2020-2021 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2020-2021.graph | EMSO Azores TCM3-3 Ocean Bottom Tilt Current Meter : 2020-2021 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-3_2020-2021_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-3_2020-2021_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-3_2020-2021/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-3_2020-2021.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-3_2020-2021&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-3_2020-2021 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2021-2022.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2021-2022 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-3_2021-2022.graph | EMSO Azores TCM3-3 Ocean Bottom Tilt Current Meter : 2021-2022 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-3_2021-2022_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-3_2021-2022_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-3_2021-2022/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-3_2021-2022.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-3_2021-2022&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-3_2021-2022 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-A_2020-2021.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-A_2020-2021 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-A_2020-2021.graph | EMSO Azores TCM3-A Ocean Bottom Tilt Current Meter : 2020-2021 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-A_2020-2021_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-A_2020-2021_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-A_2020-2021/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-A_2020-2021.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-A_2020-2021&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-A_2020-2021 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-B_2020-2021.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-B_2020-2021 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-B_2020-2021.graph | EMSO Azores TCM3-B Ocean Bottom Tilt Current Meter : 2020-2021 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-B_2020-2021_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-B_2020-2021_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-B_2020-2021/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-B_2020-2021.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-B_2020-2021&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-B_2020-2021 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-B_2021-2022.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-B_2021-2022 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-B_2021-2022.graph | EMSO Azores TCM3-B Ocean Bottom Tilt Current Meter : 2021-2022 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-B_2021-2022_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-B_2021-2022_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-B_2021-2022/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-B_2021-2022.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-B_2021-2022&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-B_2021-2022 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-C_2020-2021.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-C_2020-2021 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-C_2020-2021.graph | EMSO Azores TCM3-C Ocean Bottom Tilt Current Meter : 2020-2021 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-C_2020-2021_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-C_2020-2021_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-C_2020-2021/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-C_2020-2021.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-C_2020-2021&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-C_2020-2021 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-C_2021-2022.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-C_2021-2022 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-C_2021-2022.graph | EMSO Azores TCM3-C Ocean Bottom Tilt Current Meter : 2021-2022 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-C_2021-2022_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-C_2021-2022_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-C_2021-2022/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-C_2021-2022.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-C_2021-2022&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-C_2021-2022 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-D_2020-2021.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-D_2020-2021 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-D_2020-2021.graph | EMSO Azores TCM3-D Ocean Bottom Tilt Current Meter : 2020-2021 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-D_2020-2021_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-D_2020-2021_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-D_2020-2021/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-D_2020-2021.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-D_2020-2021&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-D_2020-2021 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-D_2021-2022.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-D_2021-2022 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_TCM3-D_2021-2022.graph | EMSO Azores TCM3-D Ocean Bottom Tilt Current Meter : 2021-2022 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-D_2021-2022_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-D_2021-2022_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_TCM3-D_2021-2022/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_TCM3-D_2021-2022.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-D_2021-2022&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-D_2021-2022 | |||
| https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Dyfamed_FCO2TW.subset | https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Dyfamed_FCO2TW | https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Dyfamed_FCO2TW.graph | EMSO Ligure Dyfamed carbon data | Data collected from Global Telecommunications System (GTS) buoy messages\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\nDC_REFERENCE (Station/Location unique identifier in data centre)\ndepth (m)\nDEPH_QC (quality flag)\nDEPH_DM (method of data processing)\nWSPD (Horizontal wind speed, meter/second)\nWSPD_QC (quality flag)\nWSPD_DM (method of data processing)\nATMP (Atmospheric pressure at altitude, hectopascal)\nATMP_QC (quality flag)\nATMP_DM (method of data processing)\nFCO2 (CO2 fugacity, microatmosphere)\nFCO2_QC (quality flag)\nFCO2_DM (method of data processing)\nTEMP (Sea temperature, degree_Celsius)\nTEMP_QC (quality flag)\nTEMP_DM (method of data processing)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/Emso_Ligure_Dyfamed_FCO2TW_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/Emso_Ligure_Dyfamed_FCO2TW_iso19115.xml | https://erddap.emso-fr.org/erddap/info/Emso_Ligure_Dyfamed_FCO2TW/index.htmlTable | http://www.obs-vlfr.fr/sodyf
| https://erddap.emso-fr.org/erddap/rss/Emso_Ligure_Dyfamed_FCO2TW.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=Emso_Ligure_Dyfamed_FCO2TW&showErrors=false&email= | LOV Laboratoire Oceanographique de Villefranche | Emso_Ligure_Dyfamed_FCO2TW | |||
| https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Dyfamed_TSCTD.subset | https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Dyfamed_TSCTD | https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Dyfamed_TSCTD.graph | EMSO Ligure Dyfamed mooring CTD data | Temperature, conductivity and pressure data collected from OceanSites/EMSO moorings\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (Depth of each measurement, m)\nTEMP (Sea temperature, degree_Celsius)\nTEMP_QC (quality flag)\nPRES (Sea pressure, decibar)\nPRES_QC (quality flag)\nDOX2 (Dissolved oxygen, micromole/kg)\nDOX2_QC (quality flag)\nPSAL (Practical salinity, PSU)\nPSAL_QC (quality flag)\nEWCT (West-east current component, meter/second)\nEWCT_QC (quality flag)\nHCSP (Horizontal current speed, meter/second)\nHCSP_QC (quality flag)\nHCDT (Current to direction relative true north, degree)\nHCDT_QC (quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/Emso_Ligure_Dyfamed_TSCTD_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/Emso_Ligure_Dyfamed_TSCTD_iso19115.xml | https://erddap.emso-fr.org/erddap/info/Emso_Ligure_Dyfamed_TSCTD/index.htmlTable | http://www.insu.cnrs.fr/environnement/atmosphere/moose-mediterranean-ocean-observing-system-on-environment
| https://erddap.emso-fr.org/erddap/rss/Emso_Ligure_Dyfamed_TSCTD.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=Emso_Ligure_Dyfamed_TSCTD&showErrors=false&email= | Observatoire Océanologique de Villefranche-sur-Mer | Emso_Ligure_Dyfamed_TSCTD | |||
| https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Dyfamed_TScurrents.subset | https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Dyfamed_TScurrents | https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Dyfamed_TScurrents.graph | EMSO Ligure Dyfamed mooring currentmeter data | Temperature, conductivity and pressure data collected from MOOSE moorings\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (Depth of each measurement, m)\nTEMP (Sea temperature, degree_Celsius)\nTEMP_QC (quality flag)\nPRES (Sea pressure, decibar)\nPRES_QC (quality flag)\nHCSP (Horizontal current speed, meter/second)\nHCSP_QC (quality flag)\nHCDT (Current to direction relative true north, degree)\nHCDT_QC (quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/Emso_Ligure_Dyfamed_TScurrents_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/Emso_Ligure_Dyfamed_TScurrents_iso19115.xml | https://erddap.emso-fr.org/erddap/info/Emso_Ligure_Dyfamed_TScurrents/index.htmlTable | http://www.insu.cnrs.fr/environnement/atmosphere/moose-mediterranean-ocean-observing-system-on-environment
| https://erddap.emso-fr.org/erddap/rss/Emso_Ligure_Dyfamed_TScurrents.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=Emso_Ligure_Dyfamed_TScurrents&showErrors=false&email= | Observatoire Océanologique de Villefranche-sur-Mer | Emso_Ligure_Dyfamed_TScurrents | |||
| https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Dyfamed_TSO2.subset | https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Dyfamed_TSO2 | https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Dyfamed_TSO2.graph | EMSO Ligure Dyfamed oxygen data | DYFAMED Time Series from 1994 to 2014 (43°25N - 7°52E). In the framework of the French MOOSE program, a fixed point observatory in the Ligurian Sea (so called DYFAMED) performs since 1991 physical, biogeochemical and biological observations of the water column structure. This observatory is hosted and managed by the Oceanological Observatory in Villefranche-sur-Mer (CNRS-SU)\n\ncdm_data_type = Point\nVARIABLES:\ntime (time of measurement, seconds since 1970-01-01T00:00:00Z)\nlongitude (longitude of measurement, degrees_east)\nlatitude (latitude of measurement, degrees_north)\nPRES (Sea water pressure, equals 0 at sea-level, decibar)\nTEMP (Sea temperature in-situ ITS-90 scale, degree_Celsius)\nPSAL (Practical salinity, PSU)\nDOXY (Dissolved oxygen, micromole/kg)\nTIME_QC (quality flag for TIME)\nPOSITION_QC (quality flag for LATITUDE and LONGITUDE)\nPRES_QC (quality flag for PRES)\nTEMP_QC (quality flag for TEMP)\nPSAL_QC (quality flag for PSAL)\nDOXY_QC (quality flag for DOXY)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/Emso_Ligure_Dyfamed_TSO2_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/Emso_Ligure_Dyfamed_TSO2_iso19115.xml | https://erddap.emso-fr.org/erddap/info/Emso_Ligure_Dyfamed_TSO2/index.htmlTable | ??? | https://erddap.emso-fr.org/erddap/rss/Emso_Ligure_Dyfamed_TSO2.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=Emso_Ligure_Dyfamed_TSO2&showErrors=false&email= | IMEV Villefranche-sur-mer | Emso_Ligure_Dyfamed_TSO2 | |||
| https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Dyfamed_TSOF.subset | https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Dyfamed_TSOF | https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Dyfamed_TSOF.graph | EMSO Ligure Dyfamed oxygen/fluorescence data | LABORATOIRE OCEANOGRAPHIQUE DE VILLEFRANCHE data from a local source.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (Depth of each measurement, m)\nPRES (sea water pressure, decibar)\nPRES_QC (quality flag)\nPSAL (practical salinity, PSU)\nPSAL_QC (quality flag)\nTEMP (sea water temperature in-situ ITS-90 scale, degree_Celsius)\nTEMP_QC (quality flag)\nDOX1 (DISSOLVED OXYGEN, ml/l)\nDOX1_QC (quality flag)\nFLUO (fluorescence, relative unit)\nFLUO_QC (quality flag)\nDOX2\nDOX2_QC (quality flag)\nFLU2 (fluorescence, milligram/m3)\nFLU2_QC (quality flag)\nOSAT\nOSAT_QC (quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/Emso_Ligure_Dyfamed_TSOF_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/Emso_Ligure_Dyfamed_TSOF_iso19115.xml | https://erddap.emso-fr.org/erddap/info/Emso_Ligure_Dyfamed_TSOF/index.htmlTable | http://www.eurosites.info
| https://erddap.emso-fr.org/erddap/rss/Emso_Ligure_Dyfamed_TSOF.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=Emso_Ligure_Dyfamed_TSOF&showErrors=false&email= | LABORATOIRE OCEANOGRAPHIQUE DE VILLEFRANCHE | Emso_Ligure_Dyfamed_TSOF | |||
| https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Real_Time.subset | https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Real_Time | https://erddap.emso-fr.org/erddap/tabledap/Emso_Ligure_Real_Time.graph | EMSO Ligure Dyfamed real-time observations | Data collected from Global Telecommunications System (GTS) buoy messages\n\ncdm_data_type = TimeSeries\nVARIABLES:\nplatform_code\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\nDC_REFERENCE (Station/Location unique identifier in data centre)\ndepth (m)\nDEPH_QC (quality flag)\nDEPH_DM (method of data processing)\nDEWT (Dew point temperature, degree_Celsius)\nDEWT_QC (quality flag)\nDEWT_DM (method of data processing)\nTEMP (Sea temperature, degree_Celsius)\nTEMP_QC (quality flag)\nTEMP_DM (method of data processing)\nATMS (Atmospheric pressure at sea level, hectopascal)\nATMS_QC (quality flag)\nATMS_DM (method of data processing)\nATPT (Atmospheric pressure hourly tendency, hectopascal/hour)\nATPT_QC (quality flag)\nATPT_DM (method of data processing)\nSWHT (SWELL HEIGHT, meter)\nSWHT_QC (quality flag)\nSWHT_DM (method of data processing)\nWDIR (Wind from direction relative true north, degree)\nWDIR_QC (quality flag)\nWDIR_DM (method of data processing)\n... (12 more variables)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/Emso_Ligure_Real_Time_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/Emso_Ligure_Real_Time_iso19115.xml | https://erddap.emso-fr.org/erddap/info/Emso_Ligure_Real_Time/index.htmlTable | http://www.obs-vlfr.fr/sodyf
| https://erddap.emso-fr.org/erddap/rss/Emso_Ligure_Real_Time.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=Emso_Ligure_Real_Time&showErrors=false&email= | Meteo-France | Emso_Ligure_Real_Time | |||
| https://erddap.emso-fr.org/erddap/tabledap/OS_DYFAMED_1994-2014_D_TSO.subset | https://erddap.emso-fr.org/erddap/tabledap/OS_DYFAMED_1994-2014_D_TSO | https://erddap.emso-fr.org/erddap/tabledap/OS_DYFAMED_1994-2014_D_TSO.graph | EMSO Ligure Dyfamed Time Series from 1994 to 2014 (43º25N - 7°52E) | DYFAMED Time Series from 1994 to 2014 (43°25N - 7°52E). In the framework of the French MOOSE program, a fixed point observatory in the Ligurian Sea (so called DYFAMED) performs since 1991 physical, biogeochemical and biological observations of the water column structure. This observatory is hosted and managed by the Oceanological Observatory in Villefranche-sur-Mer (CNRS-SU)\n\ncdm_data_type = Profile\nVARIABLES:\ntime (time of measurement, seconds since 1970-01-01T00:00:00Z)\nlatitude (latitude of measurement, degrees_north)\nlongitude (longitude of measurement, degrees_east)\nPRES (Sea water pressure, equals 0 at sea-level, decibar)\nTEMP (Sea temperature in-situ ITS-90 scale, degree_Celsius)\nPSAL (Practical salinity, PSU)\nDOXY (Dissolved oxygen, micromole/kg)\nTIME_QC (quality flag for TIME)\nPOSITION_QC (quality flag for LATITUDE and LONGITUDE)\nPRES_QC (quality flag for PRES)\nTEMP_QC (quality flag for TEMP)\nPSAL_QC (quality flag for PSAL)\nDOXY_QC (quality flag for DOXY)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/OS_DYFAMED_1994-2014_D_TSO_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/OS_DYFAMED_1994-2014_D_TSO_iso19115.xml | https://erddap.emso-fr.org/erddap/info/OS_DYFAMED_1994-2014_D_TSO/index.htmlTable | ??? | https://erddap.emso-fr.org/erddap/rss/OS_DYFAMED_1994-2014_D_TSO.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=OS_DYFAMED_1994-2014_D_TSO&showErrors=false&email= | IMEV Villefranche-sur-mer | OS_DYFAMED_1994-2014_D_TSO | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_SBE53_East_2016_2017.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_SBE53_East_2016_2017 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_SBE53_East_2016_2017.graph | EMSO-Azores : Seafloor pressure data from two SBE53 pressure gauges, 2016-2017 | This dataset contains seafloor pressure data acquired in the framework of EMSO-Azores observatory between September 2016 and July 2017 using a SBE53 pressure gauges deployed on two sites.\nWest site : The sensor was deployed on an existing benchmark installed with the submersible Nautile in August 2006 during the GRAVILUCK cruise (https://doi.org/10.17600/6010110). The benchmark sits on hard substratum with light hydrothermal sedimentation, on the North-West border of the Lucky Strike lava lake, next to a hydrothermal site.\nEast site : The sensor was deployed on an existing benchmark installed by freefall in July 2007 during the MOMARDREAM cruise (https://doi.org/10.17600/7030060). The benchmark sits in the axial valley, East of the LuckyStrike volcano in a lightly sedimented area, with apparent pillow lavas.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nPRES (Sea pressure, dbar)\nPRES_QC (Sea pressure quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_SBE53_East_2016_2017_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_SBE53_East_2016_2017_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_SBE53_East_2016_2017/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_SBE53_East_2016_2017.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_SBE53_East_2016_2017&showErrors=false&email= | LIENSs IPGP Ifremer | EMSO-AZORES_SBE53_East_2016_2017 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_SBE53_West_2016_2017.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_SBE53_West_2016_2017 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_SBE53_West_2016_2017.graph | EMSO-Azores : Seafloor pressure data from two SBE53 pressure gauges, 2016-2017 | This dataset contains seafloor pressure data acquired in the framework of EMSO-Azores observatory between September 2016 and July 2017 using a SBE53 pressure gauges deployed on two sites.\nWest site : The sensor was deployed on an existing benchmark installed with the submersible Nautile in August 2006 during the GRAVILUCK cruise (https://doi.org/10.17600/6010110). The benchmark sits on hard substratum with light hydrothermal sedimentation, on the North-West border of the Lucky Strike lava lake, next to a hydrothermal site.\nEast site : The sensor was deployed on an existing benchmark installed by freefall in July 2007 during the MOMARDREAM cruise (https://doi.org/10.17600/7030060). The benchmark sits in the axial valley, East of the LuckyStrike volcano in a lightly sedimented area, with apparent pillow lavas.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nPRES (Sea pressure, dbar)\nPRES_QC (Sea pressure quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_SBE53_West_2016_2017_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_SBE53_West_2016_2017_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_SBE53_West_2016_2017/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_SBE53_West_2016_2017.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_SBE53_West_2016_2017&showErrors=false&email= | LIENSs IPGP Ifremer | EMSO-AZORES_SBE53_West_2016_2017 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_SBE53_East_2018_2019.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_SBE53_East_2018_2019 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_SBE53_East_2018_2019.graph | EMSO-Azores : Seafloor pressure data from two SBE53 pressure gauges, 2018-2019 | This dataset contains seafloor pressure data acquired in the framework of EMSO-Azores observatory between August 2018 and June 2019 using a SBE53 pressure gauges deployed on two sites.\nWest site : The sensor was deployed on an existing benchmark installed with the submersible Nautile in August 2006 during the GRAVILUCK cruise (https://doi.org/10.17600/6010110). The benchmark sits on hard substratum with light hydrothermal sedimentation, on the North-West border of the Lucky Strike lava lake, next to a hydrothermal site.\nEast site : The sensor was deployed on an existing benchmark installed by freefall in July 2007 during the MOMARDREAM cruise (https://doi.org/10.17600/7030060). The benchmark sits in the axial valley, East of the LuckyStrike volcano in a lightly sedimented area, with apparent pillow lavas.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nPRES (Sea pressure, dbar)\nPRES_QC (Sea pressure quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_SBE53_East_2018_2019_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_SBE53_East_2018_2019_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_SBE53_East_2018_2019/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_SBE53_East_2018_2019.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_SBE53_East_2018_2019&showErrors=false&email= | LIENSs IPGP Ifremer | EMSO-AZORES_SBE53_East_2018_2019 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_SBE53_West_2018_2019.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_SBE53_West_2018_2019 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_SBE53_West_2018_2019.graph | EMSO-Azores : Seafloor pressure data from two SBE53 pressure gauges, 2018-2019 | This dataset contains seafloor pressure data acquired in the framework of EMSO-Azores observatory between August 2018 and June 2019 using a SBE53 pressure gauges deployed on two sites.\nWest site : The sensor was deployed on an existing benchmark installed with the submersible Nautile in August 2006 during the GRAVILUCK cruise (https://doi.org/10.17600/6010110). The benchmark sits on hard substratum with light hydrothermal sedimentation, on the North-West border of the Lucky Strike lava lake, next to a hydrothermal site.\nEast site : The sensor was deployed on an existing benchmark installed by freefall in July 2007 during the MOMARDREAM cruise (https://doi.org/10.17600/7030060). The benchmark sits in the axial valley, East of the LuckyStrike volcano in a lightly sedimented area, with apparent pillow lavas.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nPRES (Sea pressure, dbar)\nPRES_QC (Sea pressure quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_SBE53_West_2018_2019_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_SBE53_West_2018_2019_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_SBE53_West_2018_2019/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_SBE53_West_2018_2019.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_SBE53_West_2018_2019&showErrors=false&email= | LIENSs IPGP Ifremer | EMSO-AZORES_SBE53_West_2018_2019 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_SBE53_East_2019_2020.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_SBE53_East_2019_2020 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_SBE53_East_2019_2020.graph | EMSO-Azores : Seafloor pressure data from two SBE53 pressure gauges, 2019-2020 | This dataset contains seafloor pressure data acquired in the framework of EMSO-Azores observatory between June 2019 and September 2020 using SBE53 pressure gauges deployed on two sites.\nWest site : The sensor was deployed on an existing benchmark installed with the submersible Nautile in August 2006 during the GRAVILUCK cruise (https://doi.org/10.17600/6010110). The benchmark sits on hard substratum with light hydrothermal sedimentation, on the North-West border of the Lucky Strike lava lake, next to a hydrothermal site.\nEast site : The sensor was deployed on an existing benchmark installed by freefall in July 2007 during the MOMARDREAM cruise (https://doi.org/10.17600/7030060). The benchmark sits in the axial valley, East of the LuckyStrike volcano in a lightly sedimented area, with apparent pillow lavas.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nPRES (Sea pressure, dbar)\nPRES_QC (Sea pressure quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_SBE53_East_2019_2020_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_SBE53_East_2019_2020_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_SBE53_East_2019_2020/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_SBE53_East_2019_2020.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_SBE53_East_2019_2020&showErrors=false&email= | LIENSs IPGP Ifremer | EMSO-AZORES_SBE53_East_2019_2020 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_SBE53_West_2019_2020.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_SBE53_West_2019_2020 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_SBE53_West_2019_2020.graph | EMSO-Azores : Seafloor pressure data from two SBE53 pressure gauges, 2019-2020 | This dataset contains seafloor pressure data acquired in the framework of EMSO-Azores observatory between June 2019 and September 2020 using SBE53 pressure gauges deployed on two sites.\nWest site : The sensor was deployed on an existing benchmark installed with the submersible Nautile in August 2006 during the GRAVILUCK cruise (https://doi.org/10.17600/6010110). The benchmark sits on hard substratum with light hydrothermal sedimentation, on the North-West border of the Lucky Strike lava lake, next to a hydrothermal site.\nEast site : The sensor was deployed on an existing benchmark installed by freefall in July 2007 during the MOMARDREAM cruise (https://doi.org/10.17600/7030060). The benchmark sits in the axial valley, East of the LuckyStrike volcano in a lightly sedimented area, with apparent pillow lavas.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nPRES (Sea pressure, dbar)\nPRES_QC (Sea pressure quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_SBE53_West_2019_2020_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_SBE53_West_2019_2020_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_SBE53_West_2019_2020/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_SBE53_West_2019_2020.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_SBE53_West_2019_2020&showErrors=false&email= | LIENSs IPGP Ifremer | EMSO-AZORES_SBE53_West_2019_2020 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_EGIM_TEMP-CNDC-PRES_2017-2018.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_EGIM_TEMP-CNDC-PRES_2017-2018 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_EGIM_TEMP-CNDC-PRES_2017-2018.graph | EMSO-Azores, EGIM : Conductivity, temperature and pressure, 2017-2018 | This dataset contains conductivity, temperature and pressure data acquired between July 2017 and August 2018 on EMSO-Azores observatory by the EGIM. These are 3 of the 7 core parameters monitored by the EGIM, EMSO Generic Instrumental Module.\n\nThe EGIM prototype was deployed at Lucky Strike hydrothermal vent site, 25 m south west of the active edifice Tour Eiffel, to monitor local hydrodynamic variability and complement the data obtained by the numerous sensors set on this site: oceanographic mooring deployed south of the vent field, the multidisciplinary Seamon East node, autonomous current meters, array of temperature probes…\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nPRES (Sea pressure, dbar)\nPRES_QC (Sea pressure quality flag)\nCNDC (Electrical conductivity, S/m)\nCNDC_QC (Electrical conductivity quality flag)\nPSAL (Practical salinity, 0.001)\nPSAL_QC (Practical salinity quality flag)\nSVEL (Sound velocity, m/s)\nSVEL_QC (Sound velocity quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_EGIM_TEMP-CNDC-PRES_2017-2018_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_EGIM_TEMP-CNDC-PRES_2017-2018_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_EGIM_TEMP-CNDC-PRES_2017-2018/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_EGIM_TEMP-CNDC-PRES_2017-2018.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_EGIM_TEMP-CNDC-PRES_2017-2018&showErrors=false&email= | Ifremer IPGP | EMSO-AZORES_EGIM_TEMP-CNDC-PRES_2017-2018 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_EGIM_Precise-Pressure_2017-2018.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_EGIM_Precise-Pressure_2017-2018 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_EGIM_Precise-Pressure_2017-2018.graph | EMSO-Azores, EGIM : High precision pressure, 2017-2018 | This dataset contains pressure data acquired between July 2017 and August 2018 on EMSO-Azores observatory by the EGIM. The pressure is one of the 7 core parameters monitored by the EGIM, EMSO Generic Instrumental Module.\n\nThe EGIM prototype was deployed at Lucky Strike hydrothermal vent site, 25 m south west of the active edifice Tour Eiffel, to monitor local hydrodynamic variability and complement the data obtained by the numerous sensors set on this site: oceanographic mooring deployed south of the vent field, the multidisciplinary Seamon East node, autonomous current meters, array of temperature probes.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nPRES (Sea pressure, dbar)\nPRES_QC (Sea pressure quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_EGIM_Precise-Pressure_2017-2018_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_EGIM_Precise-Pressure_2017-2018_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_EGIM_Precise-Pressure_2017-2018/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_EGIM_Precise-Pressure_2017-2018.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_EGIM_Precise-Pressure_2017-2018&showErrors=false&email= | Ifremer IPGP | EMSO-AZORES_EGIM_Precise-Pressure_2017-2018 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_EGIM_Optode-O2_2017-2018.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_EGIM_Optode-O2_2017-2018 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_EGIM_Optode-O2_2017-2018.graph | EMSO-Azores, EGIM : Temperature and dissolved oxygen concentrations, 2017-2018 | This dataset contains temperature and dissolved oxygen concentrations and the associated sensor raw data acquired between July 2017 and August 2018 on EMSO-Azores observatory by the EGIM. Dissolved oxygen concentration is one of the 7 core parameters monitored by the EGIM, EMSO Generic Instrumental Module.\n\nThe EGIM prototype was deployed at Lucky Strike hydrothermal vent site, 25 m south west of the active edifice Tour Eiffel, to monitor local hydrodynamic variability and complement the data obtained by the numerous sensors set on this site: oceanographic mooring deployed south of the vent field, the multidisciplinary Seamon East node, autonomous current meters, array of temperature probes…\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nOSAT (Oxygen saturation, percent)\nOSAT_QC (Oxygen saturation quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nDOXY (Dissolved oxygen, umol/l)\nDOXY_QC (Dissolved oxygen quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_EGIM_Optode-O2_2017-2018_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_EGIM_Optode-O2_2017-2018_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_EGIM_Optode-O2_2017-2018/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_EGIM_Optode-O2_2017-2018.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_EGIM_Optode-O2_2017-2018&showErrors=false&email= | Ifremer IPGP | EMSO-AZORES_EGIM_Optode-O2_2017-2018 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2014-2015.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2014-2015 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2014-2015.graph | EMSO-Azores, SeaMoN East : CHEMINI total dissolved iron concentrations, 2014-2015 | This dataset contains dissolved iron concentrations (Fe(II) + Fe(III), µmol/l) acquired between July 2014 and August 2014 (n=332) using the CHEMINI Fe, a CHEmical MINIaturized analyser (samples taken every 24 hours, with daily in situ calibration using a 25 µmol/l iron standard, Vuillemin et al., 2009). The sample inlet was positioned on the mussel bed at the base of the Tour Eiffel edifice of the Lucky Strike hydrothermal vent (1695 depth). CHEMINI Fe (CF1) was mounted on the TEMPO module which was itself connected to the SeaMON East node of the EMSO-Azores observatory.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nIRON (Total iron, umol/l)\nIRON_QC (Total iron quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_CHEMINI_Total-Iron_2014-2015_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_CHEMINI_Total-Iron_2014-2015_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_CHEMINI_Total-Iron_2014-2015/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_CHEMINI_Total-Iron_2014-2015.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_CHEMINI_Total-Iron_2014-2015&showErrors=false&email= | Ifremer IPGP | EMSO-AZORES_CHEMINI_Total-Iron_2014-2015 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2016-2017.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2016-2017 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2016-2017.graph | EMSO-Azores, SeaMoN East : CHEMINI total dissolved iron concentrations, 2016-2017 | This dataset contains dissolved iron concentrations (Fe(II) + Fe(III), µmol/l) acquired between September 2016 and February 2017 (n=332) using the CHEMINI Fe, a CHEmical MINIaturized analyser (samples taken every 24 hours, with daily in situ calibration using a 25 µmol/l iron standard, Vuillemin et al., 2009). The sample inlet was positioned on the mussel bed at the base of the Tour Eiffel edifice of the Lucky Strike hydrothermal vent (1695 depth). CHEMINI Fe (CF1) was mounted on the TEMPO module which was itself connected to the SeaMON East node of the EMSO-Azores observatory.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nIRON (Total iron, umol/l)\nIRON_QC (Total iron quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_CHEMINI_Total-Iron_2016-2017_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_CHEMINI_Total-Iron_2016-2017_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_CHEMINI_Total-Iron_2016-2017/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_CHEMINI_Total-Iron_2016-2017.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_CHEMINI_Total-Iron_2016-2017&showErrors=false&email= | Ifremer IPGP | EMSO-AZORES_CHEMINI_Total-Iron_2016-2017 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2017-2018.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2017-2018 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2017-2018.graph | EMSO-Azores, SeaMoN East : CHEMINI total dissolved iron concentrations, 2017-2018 | This dataset contains dissolved iron concentrations (Fe(II) + Fe(III), µmol/l) acquired between July 2017 and March 2018 (n=168) using the CHEMINI Fe, a CHEmical MINIaturized analyser (samples taken every 12 hours, with daily in situ calibration using a 20 µmol/l iron standard, Vuillemin et al., 2009). The sample inlet was positioned on the mussel bed at the base of the Tour Eiffel edifice of the Lucky Strike hydrothermal vent (1695 depth). CHEMINI Fe (CF2) was mounted on the TEMPO module which was itself connected to the SeaMON East node of the EMSO-Azores observatory.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nIRON (Total iron, umol/l)\nIRON_QC (Total iron quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_CHEMINI_Total-Iron_2017-2018_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_CHEMINI_Total-Iron_2017-2018_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_CHEMINI_Total-Iron_2017-2018/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_CHEMINI_Total-Iron_2017-2018.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_CHEMINI_Total-Iron_2017-2018&showErrors=false&email= | Ifremer IPGP | EMSO-AZORES_CHEMINI_Total-Iron_2017-2018 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2018-2019.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2018-2019 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2018-2019.graph | EMSO-Azores, SeaMoN East : CHEMINI total dissolved iron concentrations, 2018-2019 | This dataset contains dissolved iron concentrations (Fe(II) + Fe(III), µmol/l) acquired between August 2018 and December 2018 (n=445) using the CHEMINI Fe, a CHEmical MINIaturized analyser (samples taken every 12 hours, with daily in situ calibration using a 20 µmol/l iron standard, Vuillemin et al., 2009). The sample inlet was positioned on the mussel bed at the base of the Tour Eiffel edifice of the Lucky Strike hydrothermal vent (1695 depth). CHEMINI Fe (CF2) was mounted on the TEMPO module which was itself connected to the SeaMON East node of the EMSO-Azores observatory.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nIRON (Total iron, umol/l)\nIRON_QC (Total iron quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_CHEMINI_Total-Iron_2018-2019_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_CHEMINI_Total-Iron_2018-2019_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_CHEMINI_Total-Iron_2018-2019/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_CHEMINI_Total-Iron_2018-2019.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_CHEMINI_Total-Iron_2018-2019&showErrors=false&email= | Ifremer IPGP | EMSO-AZORES_CHEMINI_Total-Iron_2018-2019 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2013-2014.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2013-2014 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2013-2014.graph | EMSO-Azores, SeaMoN East : Temperature (°C) and dissolved oxygen concentrations (µmol/l) data, 2013-2014 | This dataset contains temperature (°C) and dissolved oxygen concentrations (µmol/l) acquired between August 2013 and July 2014 using an Aanderaa optode (model 3830, sensor head # 1180-520, salinity setting 3.5%, uncorrected for pressure) The sensor. The sensor was positioned on a mussel bed at the base of the Tour Eiffel edifice (1695m depth). Data was acquired every 15 minutes. A two-point calibration at 0% and 100% saturation levels is performed at each maintenance cruise. The optode connected to the TEMPO ecological module is part of the SeaMoN East monitoring node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nOSAT (Oxygen saturation, percent)\nOSAT_QC (Oxygen saturation quality flag)\nDOXY (Dissolved oxygen, umol/l)\nDOXY_QC (Dissolved oxygen quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_Seamon-East_Optode-O2_2013-2014_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_Seamon-East_Optode-O2_2013-2014_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_Seamon-East_Optode-O2_2013-2014/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_Seamon-East_Optode-O2_2013-2014.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Seamon-East_Optode-O2_2013-2014&showErrors=false&email= | Ifremer IPGP | EMSO-AZORES_Seamon-East_Optode-O2_2013-2014 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2015-2016.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2015-2016 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2015-2016.graph | EMSO-Azores, SeaMoN East : Temperature (°C) and dissolved oxygen concentrations (µmol/l) data, 2015-2016 | This dataset contains temperature (°C) and dissolved oxygen concentrations (µmol/l) acquired between April 2015 and September 2016 using an Aanderaa optode (model 3830, sensor head # 1180-520, salinity setting 3.5%, uncorrected for pressure) The sensor. The sensor was positioned on a mussel bed at the base of the Tour Eiffel edifice (1695m depth). Data was acquired every 15 minutes. A two-point calibration at 0% and 100% saturation levels is performed at each maintenance cruise. The optode connected to the TEMPO ecological module is part of the SeaMoN East monitoring node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nOSAT (Oxygen saturation, percent)\nOSAT_QC (Oxygen saturation quality flag)\nDOXY (Dissolved oxygen, umol/l)\nDOXY_QC (Dissolved oxygen quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_Seamon-East_Optode-O2_2015-2016_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_Seamon-East_Optode-O2_2015-2016_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_Seamon-East_Optode-O2_2015-2016/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_Seamon-East_Optode-O2_2015-2016.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Seamon-East_Optode-O2_2015-2016&showErrors=false&email= | Ifremer IPGP | EMSO-AZORES_Seamon-East_Optode-O2_2015-2016 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2016-2017.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2016-2017 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2016-2017.graph | EMSO-Azores, SeaMoN East : Temperature (°C) and dissolved oxygen concentrations (µmol/l) data, 2016-2017 (Tempo) | This dataset contains temperature (°C) and dissolved oxygen concentrations (µmol/l) (and the associated sensor raw data) acquired between September 2016 and February 2017 using an Aanderaa optode (model 4330, sensor head #2133, salinity setting 3.5%, uncorrected for pressure) The sensor. The sensor was positioned on a mussel bed at the base of the Tour Eiffel edifice (1695m depth). Data was acquired every 15 minutes. A two-point calibration at 0% and 100% saturation levels is performed at each maintenance cruise. The optode connected to the TEMPO ecological module is part of the SeaMoN East monitoring node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nOSAT (Oxygen saturation, percent)\nOSAT_QC (Oxygen saturation quality flag)\nDOXY (Dissolved oxygen, umol/l)\nDOXY_QC (Dissolved oxygen quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_Seamon-East_Optode-O2_2016-2017_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_Seamon-East_Optode-O2_2016-2017_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_Seamon-East_Optode-O2_2016-2017/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_Seamon-East_Optode-O2_2016-2017.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Seamon-East_Optode-O2_2016-2017&showErrors=false&email= | Ifremer IPGP | EMSO-AZORES_Seamon-East_Optode-O2_2016-2017 | |||
| https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2012-2013.subset | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2012-2013 | https://erddap.emso-fr.org/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2012-2013.graph | EMSO-Azores, SeaMoN East : Temperature (°C) and dissolved oxygen concentrations, 2012-2013 | This dataset contains temperature (°C) and dissolved oxygen concentrations (µmol/l) acquired between July 2012 and August 2013 using an Aanderaa optode (model 3830, sensor head # 1180-520, salinity setting 3.5%, uncorrected for pressure). The sensor was positioned on a mussel bed at the base of the Tour Eiffel edifice (1695m depth). Data was acquired every 15 minutes. A two-point calibration at 0% and 100% saturation levels is performed at each maintenance cruise. The optode connected to the TEMPO ecological module is part of the SeaMoN East monitoring node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nOSAT (Oxygen saturation, percent)\nOSAT_QC (Oxygen saturation quality flag)\nDOXY (Dissolved oxygen, umol/l)\nDOXY_QC (Dissolved oxygen quality flag)\n | https://erddap.emso-fr.org/erddap/metadata/fgdc/xml/EMSO-AZORES_Seamon-East_Optode-O2_2012-2013_fgdc.xml | https://erddap.emso-fr.org/erddap/metadata/iso19115/xml/EMSO-AZORES_Seamon-East_Optode-O2_2012-2013_iso19115.xml | https://erddap.emso-fr.org/erddap/info/EMSO-AZORES_Seamon-East_Optode-O2_2012-2013/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso-fr.org/erddap/rss/EMSO-AZORES_Seamon-East_Optode-O2_2012-2013.rss | https://erddap.emso-fr.org/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Seamon-East_Optode-O2_2012-2013&showErrors=false&email= | Ifremer IPGP | EMSO-AZORES_Seamon-East_Optode-O2_2012-2013 |